Home Order Catalog Online Catalog New Items Contact Us

i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
15
OTTO BELT TENSIONER KIT
This “damped” spring loaded belt tensioner is the best that you can buy.
Check out these features:
1. Rebuilt idler with new bearing and replaceable bronze bushing all modified and ready to go.
2. Dampener sleeve that cancels spring oscillation.
3. Steel plates. These install on each side of the idler bracket to prevent wear and wobble.
4. Spring constantly corrects belt tension at all RPM. The blower, generator/alternator and idler bearings last longer as there is
less belt preload tension.
5. Kit comes with all parts and easy installation instructions. Install in about 30 minutes or less.
1960-69 Cars (All exc. Smog & A/C) C9239 3 lbs.
1961-65 Vans (FC) C9240 3 lbs.
Replacement bronze bushing C9241 2 oz.
BLOWER FAN BEARING INSTALLED
We properly install a new bearing to original specs in a good clean used housing. You can send in your good housing before or later.
Save the time, cost and possible damage to your housing trying to install yourself.
Housing with Gray Aluminum Hub and Bearing Housing with Original Style Hub and Bearing
1960-61 C5593A 6 lbs. 1960-61 C5593AG 6 lbs.
1962-64 C5593B 6 lbs. 1962-64 C5593BG 6 lbs.
1965-69 C5593C 6 lbs. 1965-69 C5593CG 6 lbs.
PRICE INCLUDES A REFUNDABLE CORE VALUE.
Also order (2) C481 gaskets and C123B o-rings.
DIPSTICK “BOOTS”
Perfect reproduction – in stock!
Either style will fit any year. Years listed are for original application.
1960-64 C95 2 oz.
1965-69 C96R 2 oz.
BLACK PLASTIC PLUGS For Engine Compartment
1961-64 Keep out mud and water.
PICTURE # PART # WEIGHT
1. 1961-64 All with Standard Transmission – Front Shroud C4225
2 oz. ea
2. Below cool air duct – Front of engine “firewall” C4228 2 oz. ea
3. Above spare tire – (2) needed C4227 2 oz. ea
3½. Bottom of 1961-64 spare tire area – plastic plug C7582 4 oz. ea
4. Large plug near battery – 2 sizes used 2½”
2¾”
C4228
C4229
2 oz. ea
2 oz. ea
4½. Plug above battery C4227 2 oz. ea
5. 1962-64 Conver tible Only – Oblong C4226 2 oz. ea
6 & 7. 1961-64 4-Door – Rectangular and
1961-64 2-Door – Rectangular – same plug; different location (C1313)
C1313 4 oz. ea
FC ENGINE SHROUD PLUG
If your FC has the later style accelerator cable that goes directly to the cross shaft in the engine compartment, you may need to plug the hole where the accelerator rod would
normally come through the front shroud. This only applies to FC’s with manual transmissions. C4227 2 oz.
ENGINE COMPARTMENT RUBBER BOOTS: See page 232
GROMMETS: See page 235
Clark REBUILDS may be a little more $ but are a whole lot B E T T E R!
We go to great lengths to insure that all parts we REBUILD are the BEST you can buy. We fully disassemble all units,
thoroughly clean them, inspect, replace needed parts, carefully reassemble and test all electrical items.
REBUILT CARBS Turbo pg. 48 PG TRANS pg. 135
Regular pg. 57 STEERING BOXES pg. 157A-B
GENERATORS, STARTERS, ALTERNATORS pgs. 83-86 REAR WHEEL BEARINGS pgs. 165 -167
Please return your CORES!
Also see
BLUE pg. MK-6
C95
C96R
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**15OTTO BELT TENSIONER KITThis "damped" spring loaded belt tensioner is the best that you can buy. Check out these features: 1. Rebuilt idler with new bearing and replaceable bronze bushing all modified and ready to go. 2. Dampener sleeve that cancels spring oscillation. 3. Steel plates. These install on each side of the idler bracket to prevent wear and wobble. 4. Spring constantly corrects belt tension at all RPM. The blower, generator/alternator and idler bearings last longer as there is less belt preload tension. 5. Kit comes with all parts and easy installation instructions. Install in about 30 minutes or less. 1960-69 Cars (All exc. Smog & A/C) C9239 3 lbs. 1961-65 Vans (FC) C9240 3 lbs. Replacement bronze bushing C9241 2 oz. BLOWER FAN BEARING INSTALLED We properly install a new bearing to original specs in a good clean used housing. You can send in your good housing before or later. Save the time, cost and possible damage to your housing trying to install yourself. Housing with Gray Aluminum Hub and Bearing Housing with Original Style Hub and Bearing1960-61 C5593A 6 lbs. 1960-61 C5593AG 6 lbs.1962-64 C5593B 6 lbs. 1962-64 C5593BG 6 lbs.1965-69 C5593C 6 lbs. 1965-69 C5593CG 6 lbs.PRICE INCLUDES A REFUNDABLE CORE VALUE. Also order (2) C481 gaskets and C123B o-rings.DIPSTICK "BOOTS" Perfect reproduction - in stock!Either style will fit any year. Years listed are for original application.1960-64 C95 2 oz. 1965-69 C96R 2 oz. BLACK PLASTIC PLUGS For Engine Compartment1961-64 Keep out mud and water.PICTURE # PART # WEIGHT1. 1961-64 All with Standard Transmission - Front Shroud C42252 oz. ea2. Below cool air duct - Front of engine "firewall" C4228 2 oz. ea 3. Above spare tire - (2) needed C4227 2 oz. ea3 1/2 . Bottom of 1961-64 spare tire area - plastic plug C7582 4 oz. ea4. Large plug near battery - 2 sizes used 2 1/2 " 2 3/4 "C4228C42292 oz. ea2 oz. ea4 1/2 . Plug above battery C4227 2 oz. ea5. 1962-64 Conver tible Only - Oblong C4226 2 oz. ea6 & 7. 1961-64 4-Door - Rectangular and 1961-64 2-Door - Rectangular - same plug; different location (C1313) C1313 4 oz. eaFC ENGINE SHROUD PLUG If your FC has the later style accelerator cable that goes directly to the cross shaft in the engine compartment, you may need to plug the hole where the accelerator rod would normally come through the front shroud. This only applies to FC's with manual transmissions. C4227 2 oz. ENGINE COMPARTMENT RUBBER BOOTS: See page 232GROMMETS: See page 235Clark REBUILDS may be a little more $ but are a whole lot B E T T E R!We go to great lengths to insure that all parts we REBUILD are the BEST you can buy. We fully disassemble all units, thoroughly clean them, inspect, replace needed parts, carefully reassemble and test all electrical items. REBUILT CARBS Turbo pg. 48 PG TRANS pg. 135 Regular pg. 57 STEERING BOXES pg. 157A-BGENERATORS, STARTERS, ALTERNATORS pgs. 83-86 REAR WHEEL BEARINGS pgs. 165 -167Please return your CORES!Also see BLUE pg. MK-6C95C96R
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2022 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498