Home Order Catalog Online Catalog New Items Contact Us

7
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
Disc.
INDIVIDUAL GASKETS & SEALS
HEAD GASKETS: STOCK (original)
Approximate thickness .032 when compressed. “Flat” side goes against head.
BIG BORE COPPER (SEE ALSO VITON HEAD SETS) Solid copper head gaskets, reuseable for standard bore thru 3½” (a must on
+.030 or larger bores to avoid gasket “hang-over”). Can also be used to adjust for cylinder head resurfacing and lowering compression for running on
regular gas. Stock thickness is approximately .032 (so .042 gains .010 and .052 gains .020). 2 Big Bore gaskets can be stacked to adjust for resurfacing.
The stock distance from the head surface to the head gasket surface is approximately 0.570-0.580. CHECK TO SEE IF YOURS HAS BEEN RESURFACED.
Also See Pg 7A for Further Explanation (NOTE: Copper head gaskets can vary ± .002)
BIG BORE (.032) Set of 6 (.032) Set of 3 (.042) Set of 6 (.042) Set of 3 (.052) Set of 6 (.052) Set of 3
1960-64 (3 3/4”) C3945 4 oz./Set C5449 2 oz./Set C3947 4 oz./Set C5450 2 oz. /Set C5676X 4 oz./Set C5676 2 oz./Set
1965-69 (3 13/16”) C3946 4 oz./Set C5451 2 oz./Set C3948 4 oz./Set C5452 2 oz./Set C5677X 4 oz./Set C5677 2 oz./Set
Stock Head Gaskets are installed with the “flat”side against the head.
CYLINDER BASE GASKETS
We offer 3 thicknesses of cylinder to block gaskets for people that prefer to
drop compression that way, or in combination with the thicker head gaskets.
EXHAUST GASKETS (PACKINGS) – Graphite
Manifold to Head: These are the correct packings for your Corvair. I.D. measurements are approximate. 3 needed per side.
Year and Measurement SET OF 3 / “1”=Set of 3 SET OF 6 / “1”=Set of 6 Individual Gaskets
1960-69 ALL (Exc. 140) (1 5/32” I.D.) C479A 3 oz./Set C479C 6 oz./Set C479AX 1 oz.
1965-69 ALL 140 (1 5/16” I.D.) C371B 3 oz./Set C371C 6 oz./Set C371A 1 oz.
Manifold to Crossover: 2 needed. Full Exhaust Gasket Set:
Year and Measurement SET OF 2 / “1”=Set of 2 Individual Gaskets
1960-69 ALL (Exc. 140) (1 13/32” I.D.) C243 4 oz./Set C243X 2 oz.
1965-69 ALL 140 (1 9/16” I.D.) C243A 4 oz./Set C243AX 2 oz.
INDIVIDUAL GASKETS
TOP BLOCK GASKETS and ENGINE COVER: 1960-69 ALL. Common Leak Area. (2) needed. Also needed when replacing blower
bearing (see special bolts page 10).
C481 each 4 oz.
REAR ENGINE HOUSING (PULLEY END): Seals to block.
C482 4 oz.
OIL FILTER BOLT GASKET: 1960-69 ALL.
C3017 each 1 oz.
OIL FILTER/FILLER/GENERATOR BASE GASKET: 1960-69 ALL.
C483A 2 oz.
OIL COOLER ADAPTOR TO BLOCK: 1960-69 ALL.
C680 1 oz.
BELL HOUSING TO BLOCK: 1960-69 ALL. GM.
C492 4 oz. / BEST QUALITY C4628 4 oz.
BELL HOUSING PLUG: Aluminum, seals hole above clutch fork pin. All Standards. C503 2 oz.
DUST SHIELD: 1960-69 Standards. Where shaft goes into clutch fork – Disc. NYLON WASHER ONLY. C504W 2 oz.
DISTRIBUTOR BASE TO ENGINE GASKET: 1960-69 ALL. C589 1 oz.
VENT TUBE GASKET: 1960-62.
C1804 Discontinued
RUBBER GASKET: 1963-69 ALL.
Where Crankcase Vent Tube comes through shroud (under clamp). C672 2 oz.
CRANKSHAFT GEAR GASKET:
C786A 2 oz.
OIL FILTER GASKET (SEAL): A/C & 1968-69. 2” o.d. rubber. C975 2 oz.
OIL FILTER ADAPTOR GASKET: A/C & 1968-69.
“Paper”. C976 2 oz.
GASKET FOR OIL FILLER CAP: 1961-69 ALL. C444X 1 oz.
OIL PUMP GASKET
.008 C1009A 1 o z. .010 C1009B 1 oz. .003 C1009C 1 oz. .005 C1009D 1 oz. SE T OF E A = C1009E 4 oz. (includes plastigage)
OIL PRESSURE REGULATOR GASKET: C1801 1 oz.
O-RINGS All of these are VITON.
OIL FILLER TUBE: Vans & 1961-62 Wagons. Not in block set but in “Every Gasket Set”. Viton. C47VM 1 oz.
FUEL PUMP: 1960-69. Viton. C258AV 1 oz.
VENT TUBE INTO ENGINE COVER (FAN BEARING) HOUSING: Viton. C427V 1 oz.
VENT TUBE INTO TUBE TO AIR CLEANER: Where it goes through shroud. Viton. C428V 1 oz.
SEE PAGE 56
CARB. BASE GASKETS
1960-64 (3 3/4”) All C675 ea. 1 oz.
1965-69 (3 13/16”) All C676 ea. 1 oz.
(Stock) Steel (.015) Approximate thickness C674 ea. 1 oz.
(Stock 140 PG) Copper (.020) Approximate thickness C1180 ea. 2 oz.
Copper (.032) Approximate thickness C1180X ea. 2 oz.
6 manifold to head and 2 manifold to crossover gaskets (packings).
1960-69 ALL (Exc. 140) 1965-69 ALL 140
C8616 8 oz. C8615 8 oz.
SEE NEXT PAGE
SEALS: CRANKSHAFT & PULLEY
SEE PAGE 4
PUSH TUBE
C680
Set of 3 C123B 2 oz.
C481
C483A
C482
C976
C975
C492
C4628
C428V
C427V
7iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**Disc.INDIVIDUAL GASKETS & SEALSHEAD GASKETS: STOCK (original)Approximate thickness .032 when compressed. "Flat" side goes against head. BIG BORE COPPER (SEE ALSO VITON HEAD SETS) Solid copper head gaskets, reuseable for standard bore thru 3 1/2 " (a must on +.030 or larger bores to avoid gasket "hang-over"). Can also be used to adjust for cylinder head resurfacing and lowering compression for running on regular gas. Stock thickness is approximately .032 (so .042 gains .010 and .052 gains .020). 2 Big Bore gaskets can be stacked to adjust for resurfacing. The stock distance from the head surface to the head gasket surface is approximately 0.570-0.580. CHECK TO SEE IF YOURS HAS BEEN RESURFACED. Also See Pg 7A for Further Explanation (NOTE: Copper head gaskets can vary ? .002)BIG BORE (.032) Set of 6 (.032) Set of 3 (.042) Set of 6 (.042) Set of 3 (.052) Set of 6 (.052) Set of 31960-64 (3 3/4") C3945 4 oz./Set C5449 2 oz./Set C3947 4 oz./Set C5450 2 oz. /Set C5676X 4 oz./Set C5676 2 oz./Set1965-69 (3 13/16") C3946 4 oz./Set C5451 2 oz./Set C3948 4 oz./Set C5452 2 oz./Set C5677X 4 oz./Set C5677 2 oz./SetStock Head Gaskets are installed with the "flat"side against the head. CYLINDER BASE GASKETS We offer 3 thicknesses of cylinder to block gaskets for people that prefer to drop compression that way, or in combination with the thicker head gaskets. EXHAUST GASKETS (PACKINGS) - Graphite Manifold to Head: These are the correct packings for your Corvair. I.D. measurements are approximate. 3 needed per side. Year and Measurement SET OF 3 / "1"=Set of 3 SET OF 6 / "1"=Set of 6 Individual Gaskets1960-69 ALL (Exc. 140) (1 5/32" I.D.) C479A 3 oz./Set C479C 6 oz./Set C479AX 1 oz.1965-69 ALL 140 (1 5/16" I.D.) C371B 3 oz./Set C371C 6 oz./Set C371A 1 oz.Manifold to Crossover: 2 needed. Full Exhaust Gasket Set: Year and Measurement SET OF 2 / "1"=Set of 2 Individual Gaskets1960-69 ALL (Exc. 140) (1 13/32" I.D.) C243 4 oz./Set C243X 2 oz.1965-69 ALL 140 (1 9/16" I.D.) C243A 4 oz./Set C243AX 2 oz.INDIVIDUAL GASKETS TOP BLOCK GASKETS and ENGINE COVER: 1960-69 ALL. Common Leak Area. (2) needed. Also needed when replacing blower bearing (see special bolts page 10). C481 each 4 oz. REAR ENGINE HOUSING (PULLEY END): Seals to block. C482 4 oz. OIL FILTER BOLT GASKET: 1960-69 ALL. C3017 each 1 oz. OIL FILTER/FILLER/GENERATOR BASE GASKET: 1960-69 ALL. C483A 2 oz. OIL COOLER ADAPTOR TO BLOCK: 1960-69 ALL. C680 1 oz. BELL HOUSING TO BLOCK: 1960-69 ALL. GM. C492 4 oz. / BEST QUALITY C4628 4 oz.BELL HOUSING PLUG: Aluminum, seals hole above clutch fork pin. All Standards. C503 2 oz.DUST SHIELD: 1960-69 Standards. Where shaft goes into clutch fork - Disc. NYLON WASHER ONLY. C504W 2 oz.DISTRIBUTOR BASE TO ENGINE GASKET: 1960-69 ALL. C589 1 oz. VENT TUBE GASKET: 1960-62. C1804 Discontinued RUBBER GASKET: 1963-69 ALL. Where Crankcase Vent Tube comes through shroud (under clamp). C672 2 oz. CRANKSHAFT GEAR GASKET: C786A 2 oz.OIL FILTER GASKET (SEAL): A/C & 1968-69. 2" o.d. rubber. C975 2 oz. OIL FILTER ADAPTOR GASKET: A/C & 1968-69. "Paper". C976 2 oz.GASKET FOR OIL FILLER CAP: 1961-69 ALL. C444X 1 oz.OIL PUMP GASKET.008 C1009A 1 o z. .010 C1009B 1 oz. .003 C1009C 1 oz. .005 C1009D 1 oz. SE T OF E A = C1009E 4 oz. (includes plastigage)OIL PRESSURE REGULATOR GASKET: C1801 1 oz.O-RINGS All of these are VITON.OIL FILLER TUBE: Vans & 1961-62 Wagons. Not in block set but in "Every Gasket Set". Viton. C47VM 1 oz.FUEL PUMP: 1960-69. Viton. C258AV 1 oz.VENT TUBE INTO ENGINE COVER (FAN BEARING) HOUSING: Viton. C427V 1 oz.VENT TUBE INTO TUBE TO AIR CLEANER: Where it goes through shroud. Viton. C428V 1 oz.SEE PAGE 56CARB. BASE GASKETS1960-64 (3 3/4") All C675 ea. 1 oz.1965-69 (3 13/16") All C676 ea. 1 oz.(Stock) Steel (.015) Approximate thickness C674 ea. 1 oz.(Stock 140 PG) Copper (.020) Approximate thickness C1180 ea. 2 oz.Copper (.032) Approximate thickness C1180X ea. 2 oz.6 manifold to head and 2 manifold to crossover gaskets (packings). 1960-69 ALL (Exc. 140) 1965-69 ALL 140C8616 8 oz. C8615 8 oz.SEE NEXT PAGESEALS: CRANKSHAFT & PULLEYSEE PAGE 4PUSH TUBEC680Set of 3 C123B 2 oz.C481C483AC482C976C975C492C4628C428VC427V
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2022 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498