Home Order Catalog Online Catalog New Items Contact Us

i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
101
Heater Hoses '61-69 Cars & Vans
HEATER HOSES Replace those cracked, oily, leaky old hoses with exact replacement hoses. Replacing heater hoses will insure that you get all
the heat possible but they WILL NOT STOP "smells" ("smells" are dangerous and are usually due to leaking seals or gaskets).
2 Types of Hoses: Both are self supporting like the originals. NOT flimsy collapsing "drier hose"
Also see Multi-Kits Blue page MK-8.
Hint: Spray inside of hose with a little silicone to ease installation.
ORIGINAL STYLE
EXACT REPRODUCTION of the original black style hoses. Stiff wire wrapped with neoprene impregnated fabric. Identical to
the hoses used at the factory. Not quite as durable as the rubber hose but usually good for many years of use.
RUBBER STYLE
Stiff wire wrapped in durable black EPDM rubber. This material looks good installed and is slightly more resistant to oil,
water and temperature extremes...and it costs LESS $$!
Heater hoses should be kept as short and
direct as possible. Keep clear of exhaust!
PICTURE #
1. 4" Hose: 1961-69 Cars & Vans. 36" lengths. Goes from lower engine shrouds to heater fan
(either side – 2 needed). May require cutting hose for some applications.
Original Style C386R 1 lb. 8 oz.
Rubber Style C4255 1 lb. 8 oz.
CLAMPS: 2 needed for each 4" hose. We offer regular stainless, all stainless, and the original factory style.
Our price is good because we buy 5000 clamps at a time!
All Stainless Regular Stainless Steel Original Style
(Including Gear Clamp)
4" Clamp C8209 4 oz.
(Gear Not Stainless)
4" Clamp C593 4 oz.
4" Clamp
C593X 4 oz.
Heater Hose Strap: Metal, keeps hose up off drive shafts and starter. 2 needed. 1965-69 C837R 5 oz.
Foam Seals: Original style, Clark reproduction. Fits all Cars & Vans 1961-69. Goes where heater hose ducts bolt to shroud.
Self-adhesive.
Left Side All
C2285 2 oz.
Right Side All (exc. Turbo)
Right Side Turbo Only C2286A 2 oz.
HEATER HOSE "COLLAR": 1961-69 Cars & Vans – Highly suggested!
GM installed a foam "collar" over the heater hose where it passed the starter solenoid so the wire in the heater hose
would not short against the starter. C8281 10 oz.
Clark Heater Hoses
are the most original available
}
MULTI-KITS
see Blue pg. MK-8
f
Pg. 104
C8281
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**101Heater Hoses '61-69 Cars & VansHEATER HOSES Replace those cracked, oily, leaky old hoses with exact replacement hoses. Replacing heater hoses will insure that you get all the heat possible but they WILL NOT STOP "smells" ("smells" are dangerous and are usually due to leaking seals or gaskets).2 Types of Hoses: Both are self supporting like the originals. NOT flimsy collapsing "drier hose"Also see Multi-Kits Blue page MK-8.Hint: Spray inside of hose with a little silicone to ease installation.ORIGINAL STYLEEXACT REPRODUCTION of the original black style hoses. Stiff wire wrapped with neoprene impregnated fabric. Identical to the hoses used at the factory. Not quite as durable as the rubber hose but usually good for many years of use.RUBBER STYLEStiff wire wrapped in durable black EPDM rubber. This material looks good installed and is slightly more resistant to oil, water and temperature extremes...and it costs LESS $$!Heater hoses should be kept as short and direct as possible. Keep clear of exhaust!PICTURE #1. 4" Hose: 1961-69 Cars & Vans. 36" lengths. Goes from lower engine shrouds to heater fan (either side - 2 needed). May require cutting hose for some applications. Original Style C386R 1 lb. 8 oz. Rubber Style C4255 1 lb. 8 oz. CLAMPS: 2 needed for each 4" hose. We offer regular stainless, all stainless, and the original factory style. Our price is good because we buy 5000 clamps at a time! All Stainless Regular Stainless Steel Original Style(Including Gear Clamp) 4" Clamp C8209 4 oz.(Gear Not Stainless)4" Clamp C593 4 oz.4" ClampC593X 4 oz.Heater Hose Strap: Metal, keeps hose up off drive shafts and starter. 2 needed. 1965-69 C837R 5 oz.Foam Seals: Original style, Clark reproduction. Fits all Cars & Vans 1961-69. Goes where heater hose ducts bolt to shroud. Self-adhesive. Left Side All C2285 2 oz. Right Side All (exc. Turbo) Right Side Turbo Only C2286A 2 oz.HEATER HOSE "COLLAR": 1961-69 Cars & Vans - Highly suggested!GM installed a foam "collar" over the heater hose where it passed the starter solenoid so the wire in the heater hose would not short against the starter. C8281 10 oz.Clark Heater Hosesare the most original available}MULTI-KITSsee Blue pg. MK-8fPg. 104C8281
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2022 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498