Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
149
Exact! Pre-BENT Car Brake Line Sets
These are produced exclusively for Clark's Corvair Parts® to our original samples (NOT to be confused with line sets with inaccurate lines from specialty "BRAKE LINE
COMPANIES"). People that used to bend their own say "never again" after using our Clark lines. Even if your lines look perfect, it is possible that moisture has started to rust
thru from the inside. Don't risk brake line failure with 50+ year old lines.
CLARK SETS are produced from original style steel tubing & should last 20-40 years! We also offer stainless lines for 1963-69 Cars only.
PRE-BENT STAINLESS Brake Lines
Regular steel lines are good for 20-40 years so I'm not sure stainless are really needed; Stainless will not rust, they look great & are stronger. Any lines listed with armor
(both regular & stainless) have stainless armor. To prevent galling, all nuts are plated steel – not stainless. Even though our lines have the best possible flared ends, new
brass "T's"/fittings should be ordered because the old brass "cone" in the "T's" gets distorted by the line. Regular steel lines give a little, but the stainless lines are so stiff
that they will not give so the brass "T" must be perfect. Even with new "T's", you may get a slight leak; we suggest the Line Fitting Sealer which can also be used with regular
steel lines.
Fitting Sealer (includes Instructions): C4500 4 oz.
BRASS "T's" – Page 150
Notes:
1. The long line from the front to the rear of the car is formed as one complete line (like the original) BUT in order to ship the line we put about a 10" diameter
(180 degree) bend in the middle (it is straight in this area anyway so you can easily bend it back to straight).
2. SOME lines require removal of gas tank or rear suspension members.
3. ALL SETS include ALL steel lines including master cylinder line (except as noted for 67-69) and are READY TO INSTALL!
4. Weights listed may be high. You will ONLY BE CHARGED FOR ACTUAL SHIPPING.
5. "ARMORED" original on 69's. 6 of the steel lines that were exposed to the wheels came on the 69's with a wire "ARMOR" wrapped around them. The "ARMOR" line sets
also fit 67-68 and the 2 front and 3 rear ones ALSO FIT 65-66.
6. Line sets Do Not Include brass "T's". These are important – see page 150.
BRAKE HOSE WARNING EARLY 1961 FC's
Chevy found the front brake hose on the early 1961 FC could rub the back of the rim w/ full steering. They offered a clip that attached to the hose & a spring helped pull it.
The brake hose bracket on later 61's & 62-65 FC was welded on differently to keep the hose out of the way. If you are replacing the hoses on an "early" 61 FC, thread hose
securely into wheel cylinder & then twist hose slightly before installing it into the bracket. Next, turn the steering full lock in both directions to insure it doesn't come close to
the rim, tire or frame. If you have the old clip & spring, you may want to continue to use those. See sketches below.
Pre-Bent Brake Line Sets
1960 CARS Original Lines C12910 10 lbs./set
1961 CARS & WAGONS Original Lines C11195 10 lbs./set (The rear lines are different on a few VERY EARLY 61's)
1962 CARS & WAGONS Original Lines C11196 10 lbs./set
1963-64 CARS Original Lines C11197 10 lbs./set
Stainless Lines C13000 10 lbs./set
1961-65 VANS (FC) – 1961 – See diagram below.
"Early" 1961 FC Original Lines C12003E 10 lbs./set
"Late" 1961 & 62 FC Original Lines C12003L 10 lbs./set
63-65 FC Original Lines C12004 10 lbs./set
1965-66 CARS (with 3/16" o.d. line FRONT TO REAR OF CAR. Check yours before ordering).
Original Lines C11198 10 lbs./set
Stainless Lines C13001 10 lbs./set
WITH "ARMOR" (2 front & 3 rear lines have '69 "ARMOR")
Original Lines C11198A 10 lbs./set
Stainless Lines C13002 10 lbs./set
1965-66 CARS (with 1/4" o.d. line FRONT TO REAR OF CAR. Check yours before ordering).
Original Lines C11199 10 lbs./set
Stainless Lines C13003 10 lbs./set
WITH "ARMOR" (2 front & 3 rear lines have '69 "ARMOR")
Original Lines C11199A 10 lbs./set
Stainless Lines C13004 10 lbs./set
1967-69 CARS (NO "ARMOR")(ALL lines including ALL steel lines at the master cylinder and to the distribution block under the dash).
Original Lines C11200 10 lbs./set
Stainless Lines C13005 10 lbs./set
SAME SET (WITH 6 "ARMOR" LINES) Original lines C11200A 10 lbs./set
Stainless Lines C13006 10 lbs./set
1967-69 CARS (NO "ARMOR") (DOES NOT INCLUDE ANY of the steel lines at the master cylinder or from master cylinder to the distribution block under the dash).
Original Lines C11201 10 lbs./set
Stainless Lines C13007 10 lbs./set
SAME SET (WITH 6 "ARMOR" LINES) C11201A 10 lbs./set
Stainless Lines C13008 10 lbs./set
AIR Shipping will be figured as dimensional
weight (20 lbs.!). See page 204 for info.
Clips – see page 149B
Grommets & Brass "T's"
See page 150
Note: Lines at the master cylinder & in
the trunk are regular steel; all others
are stainless
Later 1961 & 62-65 FC
The bracket is welded so that the hose
& steel line are at about a 45° angle to
the ground at the bracket.
A. FC Front Brake Line Clip (61-65): Not an exact repro, but looks good & works. 2 needed. C3375 2 oz. ea.
"Early" 1961 FC
The bracket is
welded so that
the hose & steel
line are nearly
parallel to the
ground at the
bracket.
C3375
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**149Exact! Pre-BENT Car Brake Line SetsThese are produced exclusively for Clark's Corvair Parts(R) to our original samples (NOT to be confused with line sets with inaccurate lines from specialty "BRAKE LINE COMPANIES"). People that used to bend their own say "never again" after using our Clark lines. Even if your lines look perfect, it is possible that moisture has started to rust thru from the inside. Don't risk brake line failure with 50+ year old lines.CLARK SETS are produced from original style steel tubing & should last 20-40 years! We also offer stainless lines for 1963-69 Cars only.PRE-BENT STAINLESS Brake LinesRegular steel lines are good for 20-40 years so I'm not sure stainless are really needed; Stainless will not rust, they look great & are stronger. Any lines listed with armor (both regular & stainless) have stainless armor. To prevent galling, all nuts are plated steel - not stainless. Even though our lines have the best possible flared ends, new brass "T's"/fittings should be ordered because the old brass "cone" in the "T's" gets distorted by the line. Regular steel lines give a little, but the stainless lines are so stiff that they will not give so the brass "T" must be perfect. Even with new "T's", you may get a slight leak; we suggest the Line Fitting Sealer which can also be used with regular steel lines. Fitting Sealer (includes Instructions): C4500 4 oz. BRASS "T's" - Page 150Notes: 1. The long line from the front to the rear of the car is formed as one complete line (like the original) BUT in order to ship the line we put about a 10" diameter (180 degree) bend in the middle (it is straight in this area anyway so you can easily bend it back to straight).2. SOME lines require removal of gas tank or rear suspension members.3. ALL SETS include ALL steel lines including master cylinder line (except as noted for 67-69) and are READY TO INSTALL!4. Weights listed may be high. You will ONLY BE CHARGED FOR ACTUAL SHIPPING.5. "ARMORED" original on 69's. 6 of the steel lines that were exposed to the wheels came on the 69's with a wire "ARMOR" wrapped around them. The "ARMOR" line sets also fit 67-68 and the 2 front and 3 rear ones ALSO FIT 65-66.6. Line sets Do Not Include brass "T's". These are important - see page 150.BRAKE HOSE WARNING EARLY 1961 FC'sChevy found the front brake hose on the early 1961 FC could rub the back of the rim w/ full steering. They offered a clip that attached to the hose & a spring helped pull it. The brake hose bracket on later 61's & 62-65 FC was welded on differently to keep the hose out of the way. If you are replacing the hoses on an "early" 61 FC, thread hose securely into wheel cylinder & then twist hose slightly before installing it into the bracket. Next, turn the steering full lock in both directions to insure it doesn't come close to the rim, tire or frame. If you have the old clip & spring, you may want to continue to use those. See sketches below.Pre-Bent Brake Line Sets1960 CARS Original Lines C12910 10 lbs./set1961 CARS & WAGONS Original Lines C11195 10 lbs./set (The rear lines are different on a few VERY EARLY 61's)1962 CARS & WAGONS Original Lines C11196 10 lbs./set1963-64 CARS Original Lines C11197 10 lbs./set Stainless Lines C13000 10 lbs./set1961-65 VANS (FC) - 1961 - See diagram below. "Early" 1961 FC Original Lines C12003E 10 lbs./set "Late" 1961 & 62 FC Original Lines C12003L 10 lbs./set 63-65 FC Original Lines C12004 10 lbs./set1965-66 CARS (with 3/16" o.d. line FRONT TO REAR OF CAR. Check yours before ordering). Original Lines C11198 10 lbs./set Stainless Lines C13001 10 lbs./set WITH "ARMOR" (2 front & 3 rear lines have '69 "ARMOR") Original Lines C11198A 10 lbs./set Stainless Lines C13002 10 lbs./set1965-66 CARS (with 1/4" o.d. line FRONT TO REAR OF CAR. Check yours before ordering). Original Lines C11199 10 lbs./set Stainless Lines C13003 10 lbs./set WITH "ARMOR" (2 front & 3 rear lines have '69 "ARMOR") Original Lines C11199A 10 lbs./set Stainless Lines C13004 10 lbs./set1967-69 CARS (NO "ARMOR")(ALL lines including ALL steel lines at the master cylinder and to the distribution block under the dash). Original Lines C11200 10 lbs./set ?Stainless Lines C13005 10 lbs./set SAME SET (WITH 6 "ARMOR" LINES) Original lines C11200A 10 lbs./set ?Stainless Lines C13006 10 lbs./set1967-69 CARS (NO "ARMOR") (DOES NOT INCLUDE ANY of the steel lines at the master cylinder or from master cylinder to the distribution block under the dash). Original Lines C11201 10 lbs./set Stainless Lines C13007 10 lbs./set SAME SET (WITH 6 "ARMOR" LINES) C11201A 10 lbs./set Stainless Lines C13008 10 lbs./setAIR Shipping will be figured as dimensional weight (20 lbs.!). See page 204 for info.Clips - see page 149BGrommets & Brass "T's"See page 150 ?Note: Lines at the master cylinder & in the trunk are regular steel; all others are stainlessLater 1961 & 62-65 FC The bracket is welded so that the hose & steel line are at about a 45? angle to the ground at the bracket.A. FC Front Brake Line Clip (61-65): Not an exact repro, but looks good & works. 2 needed. C3375 2 oz. ea."Early" 1961 FC The bracket is welded so that the hose & steel line are nearly parallel to the ground at the bracket.C3375
Next
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498