Home Order Catalog Online Catalog New Items Contact Us
     
Search
  Current Page 157B
Go to page
Click on any C CU CX part number on any page for prices
 Prev 

i
WARNING: Products on this page can expose you to a chemical, which is known to the State of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
157B
CLARK'S REBUILT CAR & VAN STEERING BOXES
Each box is fully disassembled and thoroughly cleaned and glass beaded. The pitman shaft, worm and “worm nut” are carefully inspected for
galling and wear. Steering Box Identification – see page 408
Clark's then replaces ALL the following parts :
(2) steering gear bearings and races
both seals and gasket
(2) pitman shaft bushings (steering box body and in cover)
all ball bearings
Clark's
supplies:
= pitman arm nut and lock washer = steering column gasket = each box is then bench tested and adjusted and includes instructions.
= grade 8 bolts to bolt box to body = steering column felt seal (60-64)
PLEASE NOTE:
1. We do not always have these boxes in stock if we are out of cores. If you want us to rebuild YOUR box, you must send the order with YOUR used box and
indicate you want YOUR box rebuilt. Normally we can do this within several days after receipt. If you are not going to have us rebuild YOUR box, we
suggest you call to insure we have the box you need.
2. You must keep YOUR pitman arm off YOUR box (the arm that attaches to the drag link bushing).
(Need new pitman arm bushing?)
3. Your old box has a CORE VALUE (already included in the price). You will be refunded this amount when YOUR used box is received. (For FULL CORE
REFUND box MUST " turn freely" and be the same box you ordered).
CLARK'S REBUILT CAR & VAN STEERING BOXES
1960-63 Car C10864 15 lbs.
1961-63 FC C12020 20 lbs.
1964 Car (long shaft) C10865 18 lbs.
1965 Car (long shaft) C10866 18 lbs.
1965-66 Car (short shaft) C10867 15 lbs.
1967-69 Car C10868 15 lbs.
CLARK'S REBUILT FAST RATIO CAR STEERING BOXES (seldom have) (approx. 3 3/4 turns) These were
used w/ factory quick ratio steering arms (not as "fast" as our current arms). Factory arms NOT included. You can send your fast ratio box in to be
rebuilt. Cost depends on condition, but is usually close to the price listed. CORE NOTE: The core refund listed for fast ratio boxes assumes a perfect
core. The
actual amount of refund will be determined after our inspection of the fast ratio core.
1965 Fast Ratio (long shaft) C10878 18 lbs
1965-66 Fast Ratio (short shaft) C10879
15 lbs.
Seldom have - Check or send yours for rebuild.
1967-69 Fast Ratio C10880 15 lbs
CLARK CAR STEERING BOX REBUILD KITS
These Kits INCLUDE all the parts that we use in our rebuilt steering boxes: steering box seals and gaskets, pitman shaft bushing, cover bushing,
2 bearings (C1645), ball bearing set, pitman arm nut & lock washer, bolts (steering box to car), steering column gasket (60-64 also get felt seal).
With 2 Races
1960-64 Cars
C10881 1 lb. C10881R 1 lb. 4 oz.
1965-69 Cars
C10882 1 lb.
C10882R 1 lb. 4 oz.
$$ SAVER STEERING BOX REBUILD KITS
SAME as our REGULAR STEERING BOX KITS EXCEPT that instead of 2 COMPLETE NEW BEARING UNITS (C1645) we include 18 NEW balls. You can
"pop" the old balls out and insert these new ones. Personally I'd rather use NEW BEARING UNITS. All CLARK REBUILT BOXES get whole NEW BEARING
UNITS. With 2 Races
STEERING BOX KIT with BALLS INSTEAD OF (2) C1645 BEARINGS: 60-64 Cars C10881B 12 oz. C10881BR 1 lb.
65-69 Cars C10882B 12 oz. C10882BR 1 lb.
CLARK VAN (FC) STEERING BOX REBUILD KITS
This Kit will give you everything you'll normally need to rebuild any Van (FC) steering box. C11013A INCLUDES: 2 steering bearings and races, full ball set,
pitman bushings, seal and cover gasket. Add Cover Bushing
C11013A 8 oz. C11013B 1 lb.
CLARK'S Buying USED STEERING BOXES? Check with us.
Also consider a New Stock Ratio Box
See page 157A
.
CORE FEE
is included in Price & actual
Core is listed after price.
}
NEW REPRO STEERING BOXES
STANDARD RATIO – Pg. 157A
1964 & 65 Steering Bushings: These nylon bushings fit in the spring at the steering wheel bearing on long shaft
steering boxes to take up "play". They are often worn, brittle, broken or missing.
1964 Bushing C13278 1 oz.
1965 Bushing C13279
1 oz.
Short Tours Available!
If you are going to be in our area, we'd gladly
give you a tour! We still only allow customers
to pick up large item orders like body panels
or windshields at the door.
Shock Absorbers – See pages 137-139
Coil Springs – See page 140
Stabilizer Bars – See page 167B
}
Not for telescopic
C13278
C13279
iWARNING: Products on this page can expose you to a chemical, which is known to the State of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**157BCLARK'S REBUILT CAR & VAN STEERING BOXESEach box is fully disassembled and thoroughly cleaned and glass beaded. The pitman shaft, worm and "worm nut" are carefully inspected for galling and wear. Steering Box Identification - see page 408Clark's then replaces ALL the following parts :o (2) steering gear bearings and races o both seals and gasketo (2) pitman shaft bushings (steering box body and in cover)o all ball bearingsClark's supplies:= pitman arm nut and lock washer = steering column gasket = each box is then bench tested and adjusted and includes instructions.= grade 8 bolts to bolt box to body = steering column felt seal (60-64)PLEASE NOTE: 1. We do not always have these boxes in stock if we are out of cores. If you want us to rebuild YOUR box, you must send the order with YOUR used box and indicate you want YOUR box rebuilt. Normally we can do this within several days after receipt. If you are not going to have us rebuild YOUR box, we suggest you call to insure we have the box you need. 2. You must keep YOUR pitman arm off YOUR box (the arm that attaches to the drag link bushing). (Need new pitman arm bushing?) 3. Your old box has a CORE VALUE (already included in the price). You will be refunded this amount when YOUR used box is received. (For FULL CORE REFUND box MUST " turn freely" and be the same box you ordered).CLARK'S REBUILT CAR & VAN STEERING BOXES1960-63 Car C10864 15 lbs.1961-63 FC C12020 20 lbs.1964 Car (long shaft) C10865 18 lbs. 1965 Car (long shaft) C10866 18 lbs. 1965-66 Car (short shaft) C10867 15 lbs. 1967-69 Car C10868 15 lbs.CLARK'S REBUILT FAST RATIO CAR STEERING BOXES (seldom have) (approx. 3 3/4 turns) These were used w/ factory quick ratio steering arms (not as "fast" as our current arms). Factory arms NOT included. You can send your fast ratio box in to be rebuilt. Cost depends on condition, but is usually close to the price listed. CORE NOTE: The core refund listed for fast ratio boxes assumes a perfect core. The actual amount of refund will be determined after our inspection of the fast ratio core.1965 Fast Ratio (long shaft) C10878 18 lbs1965-66 Fast Ratio (short shaft) C1087915 lbs. Seldom have - Check or send yours for rebuild.1967-69 Fast Ratio C10880 15 lbs CLARK CAR STEERING BOX REBUILD KITSThese Kits INCLUDE all the parts that we use in our rebuilt steering boxes: steering box seals and gaskets, pitman shaft bushing, cover bushing, 2 bearings (C1645), ball bearing set, pitman arm nut & lock washer, bolts (steering box to car), steering column gasket (60-64 also get felt seal).With 2 Races1960-64 Cars C10881 1 lb. C10881R 1 lb. 4 oz.1965-69 Cars C10882 1 lb.C10882R 1 lb. 4 oz.$$ SAVER STEERING BOX REBUILD KITSSAME as our REGULAR STEERING BOX KITS EXCEPT that instead of 2 COMPLETE NEW BEARING UNITS (C1645) we include 18 NEW balls. You can "pop" the old balls out and insert these new ones. Personally I'd rather use NEW BEARING UNITS. All CLARK REBUILT BOXES get whole NEW BEARING UNITS. With 2 Races STEERING BOX KIT with BALLS INSTEAD OF (2) C1645 BEARINGS: 60-64 Cars C10881B 12 oz. C10881BR 1 lb. 65-69 Cars C10882B 12 oz. C10882BR 1 lb.CLARK VAN (FC) STEERING BOX REBUILD KITSThis Kit will give you everything you'll normally need to rebuild any Van (FC) steering box. C11013A INCLUDES: 2 steering bearings and races, full ball set, pitman bushings, seal and cover gasket. Add Cover Bushing C11013A 8 oz. C11013B 1 lb. CLARK'S Buying USED STEERING BOXES? Check with us.Also consider a New Stock Ratio Box See page 157A. CORE FEEis included in Price & actual Core is listed after price.}NEW REPRO STEERING BOXES STANDARD RATIO - Pg. 157A 1964 & 65 Steering Bushings: These nylon bushings fit in the spring at the steering wheel bearing on long shaft steering boxes to take up "play". They are often worn, brittle, broken or missing. 1964 Bushing C13278 1 oz. 1965 Bushing C13279 1 oz. Short Tours Available!If you are going to be in our area, we'd gladly give you a tour! We still only allow customers to pick up large item orders like body panels or windshields at the door. Shock Absorbers - See pages 137-139Coil Springs - See page 140Stabilizer Bars - See page 167B}Not for telescopicC13278C13279

  Current Page 157B
Go to page


 Next 

Copyright © 1978, 2018 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498