Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
173
SPARK PLUG INSERTS
3 METHODS
Choice "A" is harder to use. I suggest the one time user get Style "B", or "C" especially if it is going to be done with the head on the car .
A – HELICAL COILED INSERT KIT – SPARK PLUG – AVIATION QUALITY!
If you have a head out and the threads are questionable, replace them! KIT INCLUDES: Special tap, installer tool, and instructions. Order inserts separately.
No drill needed. These are considered the best but are the hardest to install until you get the technique. Order 2 or 3 extra inserts.
KIT C3225 8 oz.
INSERTS C3226 2 oz.
$ SAVER SET of 20 INSERTS C3226A 6 oz.
B – SOLID STEEL SPARK PLUG INSERTS BY HELICOIL
We suggest either this tool or the "Time-Serts". Helicoil insert tool comes with tap, 3 different inserts & insert "setting" tool.
Includes instructions and some additional Corvair hints. Tool Set C3211T 1 lb.
Corvair Length Insert (sold each) C3212T 1 oz. ea.
C – TIME - SERTS
Trade name Time-Serts because the inside thread
is timed to the out side thread providing a uniform
thin wall, steel insert.
The advantages:
1. Thin wall design of insert.
2. Spark plug washer seals on recut aluminum
sealing surface.
3. Insert is expanded into the aluminum after in stallation to provide
maximum heat conductivity through the insert.
3 Steel Inserts C8612A 4 oz.
6 Steel Inserts C8612 4 oz.
Installation Tool – Rental C8614 2 lbs.
Installation Tool – Buy C8614B 2 lbs.
NOTE: Either method Liquid Blue
"LOCKNUT" suggested.
.02 oz. C5303 1/2 oz.
.2 oz. C3432 1 oz.
Spark Plug Inserts
You can install these inserts in a pair of
Corvair heads in about one hour without
the use of any power tools. The use
of these inserts eliminates the risk of
stripping or cross threading soft aluminum
threads. Process is much easier to install
than Heli-Coil. Tool "locks' insert in head.
TOOL RENTAL: Some parts require the rental or purchase of special tools for installation.
The Price List gives a rental price and a "CORE". The "CORE" amount will be refunded to you when we receive the tool back within 45 days. If returned within 46-60 days
the "CORE" refund will be $8.00 LESS than listed. If not returned within 60 days .... YOU OWN THE TOOL and it is paid in full so you can keep it. Tools must be returned in
good usable condition for full refund.
STEEL THREAD INSERTS
Time – Serts
The ideal fix for aluminum & steel threads. The thin wall design makes them suitable in almost any close
place. The unique feature of being expanded in the hole after installation insures the insert will stay in the
hole.
The 1/4-20 inserts are perfect for repairing the threads where Corvair rocker covers and oil pans are attached.
Order long inserts for valve cover and oil pan. Order short inserts for shroud holes.
The 5/16 short are for carb studs and rear engine housing bolts.
The 3/8-16 inserts come in a longer length for the special application of case stud inserts. The short ones are
3/8-16 x 7/16 and used for manifold stud to head, rear engine studs and starter/bell housing threads.
Tools are required when installing the steel thread inserts.
TOOL KIT: INCLUDES the correct drill, a cutter to cut recess for insert head "lip" (stop), insert tap, insert
installer.
All inserts sold Set of 5 4 oz./set Tools 1 lb.
YEAR Short Long Tool Rental Buy Tools
1/4-20 C8617 C8617L C8617 T C8617TB
5/16 -18 C8620 C8620L C8620T C8620TB
3/8-16 C8767
C8767L
C8767T C8767TB
1965-66 Padded Dashes – Page 274
see page 274
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**173SPARK PLUG INSERTS - 3 METHODSChoice "A" is harder to use. I suggest the one time user get Style "B", or "C" especially if it is going to be done with the head on the car .A - HELICAL COILED INSERT KIT - SPARK PLUG - AVIATION QUALITY! If you have a head out and the threads are questionable, replace them! KIT INCLUDES: Special tap, installer tool, and instructions. Order inserts separately. No drill needed. These are considered the best but are the hardest to install until you get the technique. Order 2 or 3 extra inserts. KIT C3225 8 oz. INSERTS C3226 2 oz. $ SAVER SET of 20 INSERTS C3226A 6 oz.B - SOLID STEEL SPARK PLUG INSERTS BY HELICOIL We suggest either this tool or the "Time-Serts". Helicoil insert tool comes with tap, 3 different inserts & insert "setting" tool. Includes instructions and some additional Corvair hints. Tool Set C3211T 1 lb. Corvair Length Insert (sold each) C3212T 1 oz. ea.C - TIME - SERTSTrade name Time-Serts because the inside thread is timed to the out side thread providing a uniform thin wall, steel insert. The advantages: 1. Thin wall design of insert. 2. Spark plug washer seals on recut aluminum sealing surface. 3. Insert is expanded into the aluminum after in stallation to provide maximum heat conductivity through the insert. 3 Steel Inserts C8612A 4 oz. 6 Steel Inserts C8612 4 oz. Installation Tool - Rental C8614 2 lbs. Installation Tool - Buy C8614B 2 lbs.NOTE: Either method Liquid Blue "LOCKNUT" suggested. .02 oz. C5303 1/2 oz. .2 oz. C3432 1 oz.Spark Plug InsertsYou can install these inserts in a pair of Corvair heads in about one hour without the use of any power tools. The use of these inserts eliminates the risk of stripping or cross threading soft aluminum threads. Process is much easier to install than Heli-Coil. Tool "locks' insert in head. TOOL RENTAL: Some parts require the rental or purchase of special tools for installation.The Price List gives a rental price and a "CORE". The "CORE" amount will be refunded to you when we receive the tool back within 45 days. If returned within 46-60 days the "CORE" refund will be $8.00 LESS than listed. If not returned within 60 days .... YOU OWN THE TOOL and it is paid in full so you can keep it. Tools must be returned in good usable condition for full refund.STEEL THREAD INSERTSTime - SertsThe ideal fix for aluminum & steel threads. The thin wall design makes them suitable in almost any close place. The unique feature of being expanded in the hole after installation insures the insert will stay in the hole.The 1/4-20 inserts are perfect for repairing the threads where Corvair rocker covers and oil pans are attached. Order long inserts for valve cover and oil pan. Order short inserts for shroud holes.The 5/16 short are for carb studs and rear engine housing bolts.The 3/8-16 inserts come in a longer length for the special application of case stud inserts. The short ones are 3/8-16 x 7/16 and used for manifold stud to head, rear engine studs and starter/bell housing threads. Tools are required when installing the steel thread inserts.TOOL KIT: INCLUDES the correct drill, a cutter to cut recess for insert head "lip" (stop), insert tap, insert installer. All inserts sold Set of 5 4 oz./set Tools 1 lb.YEAR Short Long Tool Rental Buy Tools1/4-20 C8617 C8617L C8617 T C8617TB5/16 -18 C8620 C8620L C8620T C8620TB3/8-16 C8767?C8767LC8767T C8767TB1965-66 Padded Dashes - Page 274see page 274
Next
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498