Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
176
NUTS & BOLTS
BODY BOLTS & SCREWS (Continued)
DOOR HINGE BOLT: 1965-69 C3701 2 oz. ea. Set of 10: C4721X 8 oz.
DOOR LATCH PLATE: Attaching screws – ORIGINAL 1963-64 C2195 ea. 2 oz. NON-ORIGINAL 1965-69 C2195A ea. 2 oz.
ENGINE LID LATCH BOLTS: Original style – Set of 2. 1961-64 C9652 2 oz./set
1965-69 C9653 2 oz./set
ENGINE DECK COLLAPSING SUPPORT BOLTS: 1960-69 – Sold Set of 5. May vary slightly from original style. C3702 4 oz./set
BUMPER BRACKET TO BODY BOLTS: Very close to original. Sold Set of 10. C3703 6 oz./set
1960-64 Cars – RUBBER WASHERS for bumper bolts into trunk. The front bumper is held on with 4 washer head bolts that are
installed from inside the trunk. The factory used a "glop" to seal the threads so water would not leak into the trunk. That's a good idea, but we
now sell a set of 4 rubber washers to go under the bolt heads. C11686 2 oz.
FC Body Bolts: Used in various places (mainly underneath). Small washer recessed ½" hex head. Sets/10.
13/16" long Set of 10 C4720X 6 oz. 1-¼" long Set of 10 C4721X 8 oz.
Original Bumper Bolts: Clark’s has reproduced the ORIGINAL size bumper bolts with stainless caps (for Cars & Vans with
chrome bumpers) and plain caps (for Vans with painted bumpers). All other bumper bolts have a larger head that doesn't fit the bumper contour
(we also offer those as a $$ Saver). All Cars & Vans take 6 bolts for the front and 7 for the rear. Also see Bumper Bolt & Washer Kits.
Original STAINLESS
Bumper Bolt
C112A 2 oz. ea.
NUTS: All bumper bolts. C112B 1 oz. ea.
Original PLAIN (FC)
Bumper Bolt (for painted bumpers)
C8100 2 oz. ea.
$$ SAVER LARGER HEAD
Bumper Bolt
C112 2 oz. ea.
NUT & WASHER SETS: Enough flat washers, lock washers & nuts for 1 bumper (Cars or Vans).
Front Bumper (60-69) Set of 6 – C8223 6 oz./set Rear Bumper (60-69) Set of 7 – C8224 6 oz./set
BUMPER BOLT & WASHER KITS
1960-69 Car & FC
Front Bumper BOLT KIT
1960-69 Car & FC
Rear Bumper BOLT KIT
Enough bumper bolts, nuts,
flat washers & lock washers to
do the front and rear bumper
just as they left the factory.
Original STAINLESS Bolts C8225 1 lb. C8226 1 lb.
Original PL AIN Bolts (FC only) (FC) C8229 1 lb. (FC) C8230 1 lb.
INDIVIDUAL BUMPER BOLT KIT: 1 original bumper bolt with nut, flat washer, and lock washer.
Original Stainless Head – C8227 2 oz. ea. Plain Head FC (Vans) – C8228 2 oz. ea.
1961-65 FC BUMPER BRACKET BOLT SETS
For the bumper bolts that hold the bumper to the brackets, see above. The following bolts hold the brackets & braces to the body.
FRONT BUMPER
A. Inner bracket to body (left or right). Sold set of 3 each (bolts, flat washers, lock washers & nuts) for one side. C1121 8 oz.
B. Outer brace to body & bumper brace (left or right). Set of 3 each (bolts & external lock washers) for one side. C1122 8 oz.
F. See Bumper Bolts Above.
REAR BUMPER
C. Inner brace to body (left or right). Set of 3 each (bolts & external lock washers) for one side. C2702 8 oz.
D. Outer bracket to body bumper bracket (left or right). Set of 2 each (bolts & external lock washers) for one side. C2703 6 oz.
E. Center bracket to body. Set of 2 each (bolts & external lock washers). C2704 4 oz.
F. See Bumper Bolts Above.
FC Front Lower Corner Filler Panel Hardware: Exact attaching hardware for 1 corner panel (behind front bumper end).
Kit includes 5 retainers, 2 bolts & 3 screws C4871K 6 oz. Set of 2 Bolts only C4873A 2 oz.
Set of 5 Retainers only C4873R 2 oz. Set of 3 screws only C4873E 2 oz.
Tunnel Pan Screws: Sold Sets of 10. Look original installed (2 Sets usually needed).
1960-64 Cars Original Size C3599 4 oz./set 1965-69 Cars Original Size C2176 4 oz./set
1960-64 Cars Oversize C2125 4 oz./set 1965-69 Cars Oversize C2177 4 oz./set
1965-69 Cars Original Size C3104 4 oz./set
1965-69 Cars Oversize C3105 4 oz./set
TUNNEL PAN INSULATOR FELT: 2-3 of these squares were glued to the inside of 1960-69 tunnel pans to keep cables and rods from rattling. Exact replacement.
C718 4 oz.
Set of 20
C9653
C3703
C4720X
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**176NUTS & BOLTSBODY BOLTS & SCREWS (Continued)DOOR HINGE BOLT: 1965-69 C3701 2 oz. ea. Set of 10: C4721X 8 oz.DOOR LATCH PLATE: Attaching screws - ORIGINAL 1963-64 C2195 ea. 2 oz. NON-ORIGINAL 1965-69 C2195A ea. 2 oz.ENGINE LID LATCH BOLTS: Original style - Set of 2. 1961-64 C9652 2 oz./set 1965-69 C9653 2 oz./setENGINE DECK COLLAPSING SUPPORT BOLTS: 1960-69 - Sold Set of 5. May vary slightly from original style. C3702 4 oz./setBUMPER BRACKET TO BODY BOLTS: Very close to original. Sold Set of 10. C3703 6 oz./set1960-64 Cars - RUBBER WASHERS for bumper bolts into trunk. The front bumper is held on with 4 washer head bolts that are installed from inside the trunk. The factory used a "glop" to seal the threads so water would not leak into the trunk. That's a good idea, but we now sell a set of 4 rubber washers to go under the bolt heads. C11686 2 oz.FC Body Bolts: Used in various places (mainly underneath). Small washer recessed 1/2 " hex head. Sets/10. 13/16" long Set of 10 C4720X 6 oz. 1- 1/4 " long Set of 10 C4721X 8 oz.Original Bumper Bolts: Clark's has reproduced the ORIGINAL size bumper bolts with stainless caps (for Cars & Vans with chrome bumpers) and plain caps (for Vans with painted bumpers). All other bumper bolts have a larger head that doesn't fit the bumper contour (we also offer those as a $$ Saver). All Cars & Vans take 6 bolts for the front and 7 for the rear. Also see Bumper Bolt & Washer Kits.Original STAINLESS Bumper BoltC112A 2 oz. ea.NUTS: All bumper bolts. C112B 1 oz. ea.Original PLAIN (FC) Bumper Bolt (for painted bumpers)C8100 2 oz. ea.$$ SAVER LARGER HEADBumper Bolt C112 2 oz. ea.NUT & WASHER SETS: Enough flat washers, lock washers & nuts for 1 bumper (Cars or Vans). Front Bumper (60-69) Set of 6 - C8223 6 oz./set Rear Bumper (60-69) Set of 7 - C8224 6 oz./setBUMPER BOLT & WASHER KITS1960-69 Car & FC Front Bumper BOLT KIT1960-69 Car & FC Rear Bumper BOLT KITEnough bumper bolts, nuts, flat washers & lock washers to do the front and rear bumper just as they left the factory.Original STAINLESS Bolts C8225 1 lb. C8226 1 lb.Original PL AIN Bolts (FC only) (FC) C8229 1 lb. (FC) C8230 1 lb.INDIVIDUAL BUMPER BOLT KIT: 1 original bumper bolt with nut, flat washer, and lock washer. Original Stainless Head - C8227 2 oz. ea. Plain Head FC (Vans) - C8228 2 oz. ea.1961-65 FC BUMPER BRACKET BOLT SETSFor the bumper bolts that hold the bumper to the brackets, see above. The following bolts hold the brackets & braces to the body.FRONT BUMPERA. Inner bracket to body (left or right). Sold set of 3 each (bolts, flat washers, lock washers & nuts) for one side. C1121 8 oz.B. Outer brace to body & bumper brace (left or right). Set of 3 each (bolts & external lock washers) for one side. C1122 8 oz.F. See Bumper Bolts Above.REAR BUMPERC. Inner brace to body (left or right). Set of 3 each (bolts & external lock washers) for one side. C2702 8 oz.D. Outer bracket to body bumper bracket (left or right). Set of 2 each (bolts & external lock washers) for one side. C2703 6 oz.E. Center bracket to body. Set of 2 each (bolts & external lock washers). C2704 4 oz.F. See Bumper Bolts Above.FC Front Lower Corner Filler Panel Hardware: Exact attaching hardware for 1 corner panel (behind front bumper end). Kit includes 5 retainers, 2 bolts & 3 screws C4871K 6 oz. Set of 2 Bolts only C4873A 2 oz. Set of 5 Retainers only C4873R 2 oz. Set of 3 screws only C4873E 2 oz.Tunnel Pan Screws: Sold Sets of 10. Look original installed (2 Sets usually needed). 1960-64 Cars Original Size C3599 4 oz./set 1965-69 Cars Original Size C2176 4 oz./set 1960-64 Cars Oversize C2125 4 oz./set 1965-69 Cars Oversize C2177 4 oz./set 1965-69 Cars Original Size C3104 4 oz./set 1965-69 Cars Oversize C3105 4 oz./setTUNNEL PAN INSULATOR FELT: 2-3 of these squares were glued to the inside of 1960-69 tunnel pans to keep cables and rods from rattling. Exact replacement. C718 4 oz. Set of 20C9653C3703C4720X
Next
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498