Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

179A

WINDSHIELD MOULDING CLIPS

Usually very rusty. Hold trim on.

20 clips used for the front and 20 for the rear trim on 1965-69. All clips are interchangeable but we have listed them as they came from the factory. They are usually very

rusty or broken & the studs often break off. If you have good metal, you can use the repair studs or the screws which can be used with all of the clips. (NOTE: There used to

be special clips for use with the screws, but they are no longer available. We found the screws went into the hole ﬁne with no modiﬁcation.)

1965-69 REPLACEMENT STUDS: These replace those rusted or broken off originals. Look original. Just drill hole and screw into "shoulder".

1965-69 – allows use of regular clips. Sold set of 10. If metal is badly rusted, these may not work. Requires #48, #49 or 5/64 drill.

Set of 10 C640A 2 oz./set

SCREWS to be used with All Clips to replace studs – Set of 10 C1284X 4 oz./set

ORIGINAL '65-67 STYLE: (Front or Rear Trim) Steel, Press on to the little studs. Each C640 1 oz.

Set of 10 C640X 4 oz./set

ORIGINAL '68-69 STYLE: (Front or Rear Trim) Steel, Press on to the little studs. Set of 10 C1285 4 oz./set

PLASTIC CLIPS: 65-69 FRONT AND REAR windshield trim. For use on original studs or with replacement screws.

Work great and will not rust. Set of 10 C11565 2 oz./set

VENT WINDOW SCREWS & RIVETS – See pages 223-227

WINDOW METAL TRIM SCREWS: '60-64 CARS

WINDSHIELD METAL TRIM: Screws for the trim piece above windshield. Holds front of headliner. Chrome.

Each C1218 ½ oz. ea. Set of 10 C1218A 2 oz./set

WINDOW METAL INSIDE PAINTED METAL TRIM: 1960-64 – Rear windows, quarter windows, and coat hooks. Chrome.

Each C1218 ½ oz. ea. Set of 10 C1218A 2 oz./set

LICENSE PLATE PARTS

PLASTIC RETAINER: 1961-62 WAGONS – (Rear) Can be used on 61-64 Cars & 61-65 Vans. C2174 1 oz.

Screw for C2174 C2175 1 oz. ea.

1960-64 Front License Retainers & Screws

We now have the original style retainers that push on to the license bracket on the car as well as the screws. These are

much easier than trying to use a bolt & nut. Sold set of 2 retainers & 2 screws. C93E 4 oz.

1965-69 CARS: Front or Rear Retainers C535 ea. 1 oz.

Set of 4 C8168 2 oz.

SCREWS for C535 Set of 4 C1273 4 oz./set

FRONT LICENSE PLATE BRACKET: 1965-69 Excellent repro. Also order retainers. C8924 1 lb.

BOLTS: Hold bracket to body. Set of 2 C9060 2 oz./set

LICENSE PLATE BOLTS & NUTS: 1960-64 cars – Steel bolts & nuts – set of 4 C1272 4 oz./set

NYLON LICENSE PLATE BOLTS & NUTS: Shakeproof – Sold Set of (4) C4900 2 oz.

LICENSE PLATE LENS SCREWS AND LICENSE PLATE LIGHT TO BODY SCREWS – SEE PAGE 93

LICENSE PLATE BUMPERS – Exact repros

FRONT LICENSE RUBBER BUMPER: 1965-69 – 1 needed C532 1 oz. ea.

REAR LICENSE RUBBER BUMPER: 2 needed – 1960 C534A 1 oz. ea.

1961-62 Lakewood & 1961-63 Cars C534B 1 oz. ea.

1964 C534C 1 oz. ea.

1965-69 C532 1 oz. ea.

LICENSE LIGHT WIRE GROMMET: 61-62 Wagon – 2 hole grommet for wires going through rear engine "door" – almost exact repro

C6869 2 oz.

1965-69 engine lid. Usually very hard from engine heat. C9650 2 oz.

TRANS. & DIFFERENTIAL BOLTS

DIFFERENTIAL TO TRANS.: SOLD AS A SET "GR 8" – NOT original style. All 6 oz./set.

1961-63 (set/4 bolts): C5205R 1964-65 (set/4 bolts): C5206R 1966-69 (set/6 bolts): C5207R

TRANSMISSION TO CROSS SUPPORT: SOLD AS A FULL SET "GR 8". Set includes all necessary bolts & LW. All 4 oz./set.

(Does Not include any special spacers or shims).

1960-65 Std (3 bolts, 3 LW): C6891 1960-69 PG (4 bolts, 4 LW): C6892 1966-69 Std (4 bolts, 4 LW): C6893

TRANSMISSION COVER BOLTS

1960-65 3 Speed Front Cover Bolts (4 bolts, 4 LW): C4417 4 oz./set

1960-63 3 speed Top Cover Bolts (8 bolts, 8 LW): C4423 4 oz./set

1961-65 4 Speed Side Cover Bolts (8 bolts, 8 LW): C4423 4 oz./set

1961-65 4 Speed Front Cover Bolts (6 bolts): C4431 4 oz./set

1966-69 3 & 4 speed Side Cover Bolts (7 bolts, 7 LW): C4407 8 oz./set

Transmission Mount Spacer: 1961-65 4 speed.

Often missing! Exact Repro. C9387 2 oz.

FLYWHEEL BOLT KITS

RE-BOLT YOUR OWN – See page 110

PG PAN & AXLE COVER BOLTS

(Included with new aluminum pans)

Aluminum PG Pan Bolts (set/14): C7224B 6 oz.

Stock PG Pan Bolts (set/14): C4379 8 oz.

Aluminum Axle Cover Bolts (set of 6): C7226B 4 oz.

PG Flex Plate Bolts

Flex plate to Converter – sold each. C1870 1 oz. ea.

Flex plate to Crankshaft – set of 6. C1870A 6 oz./set

C535

C2174

C2741

C93E

C532

C534C

C534B

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**179AWINDSHIELD MOULDING CLIPS Usually very rusty. Hold trim on.20 clips used for the front and 20 for the rear trim on 1965-69. All clips are interchangeable but we have listed them as they came from the factory. They are usually very rusty or broken & the studs often break off. If you have good metal, you can use the repair studs or the screws which can be used with all of the clips. (NOTE: There used to be special clips for use with the screws, but they are no longer available. We found the screws went into the hole fine with no modification.)1965-69 REPLACEMENT STUDS: These replace those rusted or broken off originals. Look original. Just drill hole and screw into "shoulder". 1965-69 - allows use of regular clips. Sold set of 10. If metal is badly rusted, these may not work. Requires #48, #49 or 5/64 drill. Set of 10 C640A 2 oz./setSCREWS to be used with All Clips to replace studs - Set of 10 C1284X 4 oz./set ORIGINAL '65-67 STYLE: (Front or Rear Trim) Steel, Press on to the little studs. Each C640 1 oz. Set of 10 C640X 4 oz./setORIGINAL '68-69 STYLE: (Front or Rear Trim) Steel, Press on to the little studs. Set of 10 C1285 4 oz./setPLASTIC CLIPS: 65-69 FRONT AND REAR windshield trim. For use on original studs or with replacement screws.Work great and will not rust. Set of 10 C11565 2 oz./setVENT WINDOW SCREWS & RIVETS - See pages 223-227WINDOW METAL TRIM SCREWS: '60-64 CARSWINDSHIELD METAL TRIM: Screws for the trim piece above windshield. Holds front of headliner. Chrome. Each C1218 1/2 oz. ea. Set of 10 C1218A 2 oz./setWINDOW METAL INSIDE PAINTED METAL TRIM: 1960-64 - Rear windows, quarter windows, and coat hooks. Chrome. Each C1218 1/2 oz. ea. Set of 10 C1218A 2 oz./setLICENSE PLATE PARTSPLASTIC RETAINER: 1961-62 WAGONS - (Rear) Can be used on 61-64 Cars & 61-65 Vans. C2174 1 oz. Screw for C2174 C2175 1 oz. ea.1960-64 Front License Retainers & ScrewsWe now have the original style retainers that push on to the license bracket on the car as well as the screws. These are much easier than trying to use a bolt & nut. Sold set of 2 retainers & 2 screws. C93E 4 oz. 1965-69 CARS: Front or Rear Retainers C535 ea. 1 oz. Set of 4 C8168 2 oz. SCREWS for C535 Set of 4 C1273 4 oz./setFRONT LICENSE PLATE BRACKET: 1965-69 Excellent repro. Also order retainers. C8924 1 lb. BOLTS: Hold bracket to body. Set of 2 C9060 2 oz./setLICENSE PLATE BOLTS & NUTS: 1960-64 cars - Steel bolts & nuts - set of 4 C1272 4 oz./set NYLON LICENSE PLATE BOLTS & NUTS: Shakeproof - Sold Set of (4) C4900 2 oz.LICENSE PLATE LENS SCREWS AND LICENSE PLATE LIGHT TO BODY SCREWS - SEE PAGE 93LICENSE PLATE BUMPERS - Exact reprosFRONT LICENSE RUBBER BUMPER: 1965-69 - 1 needed C532 1 oz. ea.REAR LICENSE RUBBER BUMPER: 2 needed - 1960 C534A 1 oz. ea. 1961-62 Lakewood & 1961-63 Cars C534B 1 oz. ea. 1964 C534C 1 oz. ea. 1965-69 C532 1 oz. ea. LICENSE LIGHT WIRE GROMMET: 61-62 Wagon - 2 hole grommet for wires going through rear engine "door" - almost exact repro C6869 2 oz. 1965-69 engine lid. Usually very hard from engine heat. C9650 2 oz.TRANS. & DIFFERENTIAL BOLTSDIFFERENTIAL TO TRANS.: SOLD AS A SET "GR 8" - NOT original style. All 6 oz./set. 1961-63 (set/4 bolts): C5205R 1964-65 (set/4 bolts): C5206R 1966-69 (set/6 bolts): C5207RTRANSMISSION TO CROSS SUPPORT: SOLD AS A FULL SET "GR 8". Set includes all necessary bolts & LW. All 4 oz./set. (Does Not include any special spacers or shims). 1960-65 Std (3 bolts, 3 LW): C6891 1960-69 PG (4 bolts, 4 LW): C6892 1966-69 Std (4 bolts, 4 LW): C6893TRANSMISSION COVER BOLTS 1960-65 3 Speed Front Cover Bolts (4 bolts, 4 LW): C4417 4 oz./set 1960-63 3 speed Top Cover Bolts (8 bolts, 8 LW): C4423 4 oz./set 1961-65 4 Speed Side Cover Bolts (8 bolts, 8 LW): C4423 4 oz./set 1961-65 4 Speed Front Cover Bolts (6 bolts): C4431 4 oz./set 1966-69 3 & 4 speed Side Cover Bolts (7 bolts, 7 LW): C4407 8 oz./setTransmission Mount Spacer: 1961-65 4 speed. Often missing! Exact Repro. C9387 2 oz.FLYWHEEL BOLT KITSRE-BOLT YOUR OWN - See page 110PG PAN & AXLE COVER BOLTS(Included with new aluminum pans)Aluminum PG Pan Bolts (set/14): C7224B 6 oz. Stock PG Pan Bolts (set/14): C4379 8 oz. Aluminum Axle Cover Bolts (set of 6): C7226B 4 oz.PG Flex Plate BoltsFlex plate to Converter - sold each. C1870 1 oz. ea.Flex plate to Crankshaft - set of 6. C1870A 6 oz./setC535C2174C2741C93EC93EC532C534CC534B