Home Order Catalog Online Catalog New Items Contact Us
     
Search
  Current Page 266
Go to page
Go to page
Click on any C CU CX part number on any page for prices
 Prev 

i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
266
UPHOLSTERY INSTALLATION SUPPLIES
All our upholstery comes with complete instructions. The following are highly suggested items that you may want to order.
HOG RING PLIERS – These are used to attach the reproduction upholstery the same way as the originals. Generally you will need from 300-
400 clips. These PROFESSIONAL pliers really are a must. Straight ones are suggested. Bent ones also handy but not essential. ORDER HOG RINGS SEPARATELY!
PROFESSIONAL PLIERS STRAIGHT: C4879 8 oz. BENT: C6489 8 oz.
HOG RINGS:
Sold Set of 100 C4880 6 oz./set
Sold Set of 500 C4880X 1 lb.
FC (Van) UPHOLSTERY CLIPS Originals – These were used along with hog ring clips for FC in certain areas.
Sold Set of 10. C5921 1 oz./set
SEAT CLIPS – Holds pivot on the bucket seat back. "Impossible" to get off in good shape! "1" = Set of 2 1960-69 C4883 1 oz./set
SEAT WASHERS – Used between bucket seat pivot and the vinyl to prevent damage to the vinyl. Sold each.
Not original material. 2-4 needed per bucket seat depending on year. Also fit Car & FC front bench seats. C4884 1 oz. ea.
FRONT SEAT ADJUSTER HELPER SPRING – 1962-69 with bucket seats – either side. C3252 4 oz.
1961-65 FC (Vans) C3247 4 oz.
UPHOLSTERY SCREWS
ORIGINAL STYLE for 1966-69: Cone washer just extends away from head of screw. Sold Set of 10. C4336 2 oz./set
OVERSIZE WASHER: Original for some 1965's – Same as C4336 but washer is slightly LARGER in case original had pulled through upholstery.
Sold Set of 10. C4337 2 oz./set
LARGER STYLE WASHER & SCREW: (see picture) Also fit 1960 package area.
Set of 10 – C1216A 4 oz./set OVERSIZE SCREW (Set of 5) – C4338 2 oz./set
SEAT PIVOT CAPS – Yes! Those little chrome "caps" that fit over bottom pivot on bucket seats. The ones that you usually
cuss at and bend. 2 needed per car. 1960-66
ROUND ones are EXACT REPROROUNDC1748 1 oz. ea.
Seat Pivot Cap Installation Tool
This piece of tubing fits the chrome caps that fit over the pivot on the bucket seat
perfectly and installs them without damage. Very difficult to install without this tool. C6587T 4 oz.
SEAT BUMPERS –
See page 234
SEAT BUNS
next page
SEAT EXTENDERS – For tall drivers. These only fit stock bucket seats and stock bench seats. This will allow
for greater front leg room. 1 Set is enough for (1) bucket seat or (1) bench seat. Bolts to old holes and moves seat back about 3".
Adjustment still works. Does not fit 1960-61 Cars or Vans. C8256 7 lbs.
R
SEAT "CARDBOARD" – 1962-66
NOT INCLUDED WITH UPHOLSTERY.
Bucket seats had a "cardboard" piece that helped cover sharp areas on the bottom.
Highly suggested as the old ones are usually bad. 1 needed per bucket seat. Sold each.
1962-64 – C7512 8 oz. ea. 1965-66 – C7513 10 oz. ea.
COTTON PADDING – Most bucket seats and some rear seats have sections of cotton placed over the foam at the factory. It helps to give a "full"
appearance. This cotton is usually flattened and new is suggested. SEE PAGE 265A
FOAM PADDING
You may want some of this to give fullness to a seat, sound-proofing, etc. The 7/16" semi-firm is most useful (the soft is too soft to give much fullness; it just collapses).
SEMI-FIRM FOAM – Sold by the square yard. 1 = 1 square yard, 2 = 36" X 72" C13085 3 lbs. Free Sample – C13086 1 oz.
SOFT FOAM – 3/4" thick, but very soft. Approximately 22-24" wide. "1" = 12" x 24"; "2" = 24" x 24"; "3" = 35" x 24", etc. C5671 8 oz./ft.
— MORE FOAM – SEE PAGE 265B —
FELT & JUTE – The felt is approx. 1/8 " thick by 24" x 56". It is used in some areas of upholstery installation as a padding.
There is also a piece of jute padding 8" x 12" which usually is not needed. C7032 1 lb.
BUCKET SEAT TRIM – Beautiful chrome repros for '60-'66 Bucket Seats
Replace those pitted, scratched or dented trim pieces. Fit outside of right & left bucket seats (sold as a pair).
These will not fit the inside of seats. These qualify for the interior discount. Also order seat pivot caps (C1748) sold each.
C5349T 4 lbs./pair
GLUES – see bottom of page 268
j
C6587T
C1748
ALL ITEMS
Pgs. 264-288 qualify for
Interior Discount
see Blue pg. MK-2
C5349T
C4883
C4884
C7512
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**266UPHOLSTERY INSTALLATION SUPPLIESAll our upholstery comes with complete instructions. The following are highly suggested items that you may want to order.HOG RING PLIERS - These are used to attach the reproduction upholstery the same way as the originals. Generally you will need from 300-400 clips. These PROFESSIONAL pliers really are a must. Straight ones are suggested. Bent ones also handy but not essential. ORDER HOG RINGS SEPARATELY!PROFESSIONAL PLIERS STRAIGHT: C4879 8 oz. BENT: C6489 8 oz.HOG RINGS: Sold Set of 100 C4880 6 oz./set Sold Set of 500 C4880X 1 lb.FC (Van) UPHOLSTERY CLIPS Originals - These were used along with hog ring clips for FC in certain areas. Sold Set of 10. C5921 1 oz./setSEAT CLIPS - Holds pivot on the bucket seat back. "Impossible" to get off in good shape! "1" = Set of 2 1960-69 C4883 1 oz./setSEAT WASHERS - Used between bucket seat pivot and the vinyl to prevent damage to the vinyl. Sold each. Not original material. 2-4 needed per bucket seat depending on year. Also fit Car & FC front bench seats. C4884 1 oz. ea.FRONT SEAT ADJUSTER HELPER SPRING - 1962-69 with bucket seats - either side. C3252 4 oz. 1961-65 FC (Vans) C3247 4 oz.UPHOLSTERY SCREWSORIGINAL STYLE for 1966-69: Cone washer just extends away from head of screw. Sold Set of 10. C4336 2 oz./set OVERSIZE WASHER: Original for some 1965's - Same as C4336 but washer is slightly LARGER in case original had pulled through upholstery. Sold Set of 10. C4337 2 oz./setLARGER STYLE WASHER & SCREW: (see picture) Also fit 1960 package area. Set of 10 - C1216A 4 oz./set OVERSIZE SCREW (Set of 5) - C4338 2 oz./setSEAT PIVOT CAPS - Yes! Those little chrome "caps" that fit over bottom pivot on bucket seats. The ones that you usually cuss at and bend. 2 needed per car. 1960-66 ROUND ones are EXACT REPRO - ROUND - C1748 1 oz. ea.Seat Pivot Cap Installation ToolThis piece of tubing fits the chrome caps that fit over the pivot on the bucket seat perfectly and installs them without damage. Very difficult to install without this tool. C6587T 4 oz.SEAT BUMPERS - See page 234 SEAT BUNS next pageSEAT EXTENDERS - For tall drivers. These only fit stock bucket seats and stock bench seats. This will allow for greater front leg room. 1 Set is enough for (1) bucket seat or (1) bench seat. Bolts to old holes and moves seat back about 3". Adjustment still works. Does not fit 1960-61 Cars or Vans. C8256 7 lbs.R SEAT "CARDBOARD" - 1962-66 NOT INCLUDED WITH UPHOLSTERY.Bucket seats had a "cardboard" piece that helped cover sharp areas on the bottom. Highly suggested as the old ones are usually bad. 1 needed per bucket seat. Sold each. 1962-64 - C7512 8 oz. ea. 1965-66 - C7513 10 oz. ea. COTTON PADDING - Most bucket seats and some rear seats have sections of cotton placed over the foam at the factory. It helps to give a "full" appearance. This cotton is usually flattened and new is suggested. SEE PAGE 265AFOAM PADDINGYou may want some of this to give fullness to a seat, sound-proofing, etc. The 7/16" semi-firm is most useful (the soft is too soft to give much fullness; it just collapses). SEMI-FIRM FOAM - Sold by the square yard. 1 = 1 square yard, 2 = 36" X 72" C13085 3 lbs. Free Sample - C13086 1 oz. SOFT FOAM - 3/4" thick, but very soft. Approximately 22-24" wide. "1" = 12" x 24"; "2" = 24" x 24"; "3" = 35" x 24", etc. C5671 8 oz./ft. -- MORE FOAM - SEE PAGE 265B --FELT & JUTE - The felt is approx. 1/8 " thick by 24" x 56". It is used in some areas of upholstery installation as a padding. There is also a piece of jute padding 8" x 12" which usually is not needed. C7032 1 lb.BUCKET SEAT TRIM - Beautiful chrome repros for '60-'66 Bucket Seats Replace those pitted, scratched or dented trim pieces. Fit outside of right & left bucket seats (sold as a pair). These will not fit the inside of seats. These qualify for the interior discount. Also order seat pivot caps (C1748) sold each. C5349T 4 lbs./pair GLUES - see bottom of page 268j C6587TC1748ALL ITEMSPgs. 264-288 qualify for Interior Discountsee Blue pg. MK-2C5349TC4883C4884C7512

  Current Page 266
Go to page


 Next 

Copyright © 1978, 2018 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498