Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
319
INDIVIDUAL AIR CONDITIONING PARTS
ALL YEARS
Sanden SD7 Compressor – C11789 20 lbs.
This is True Sanden and the only one recommended for Corvairs.
The best upgrade you can make to your A/C system is in the way of a more modern and efficient compressor. We currently
carry the most popular choice. This is a bolt on solution to your tired Frigidaire A6. Our SD-7 is a double pulley, side
discharged, o-ring fitting, silver finished unit that will work with either R-12 or R-134 refrigerant, and comes with a full 90-day
warranty. Advantages include: a higher compression ratio that improves efficiency (less load on engine), O-ring seals that work with the more modern
R-134, smaller & much lighter than the stock counterpart, and this unit can turn either clockwise or counter-clockwise, making it the perfect match to the
Corvair. Note: There are larger units on the market, but they take more engine power & aren't warranteed for Corvair rotation.
Sanden Compressor Fittings Kit – R134 C11790 1 lb.
Are you adding a Sanden Compressor to your stock A/C? Keep your engine compartment clean with these compact fittings.
These tight 90 degree fittings fit both the #8 and #10 o-ring fittings on your Sanden Compressor while stepping up to the
stock Corvair #10 and #12 hose sizes.
See Component flowchart pages 322 & 323 for hose kits that include all of the fittings.
2-Carb Sanden Compressor Mounting Bracket – C11157 4 lbs.
This elegant, low profile designed 2-carb Sanden Compressor mounting bracket has
proven itself through the years. These brackets were designed to work with the new
lighter, more efficient Sanden compressors. They will fit any year head in the stock
location and align to your stock drive pulley perfectly. This bracket will even clear
the FC engine cover. All brackets are laser cut, professionally welded, and delivered
in a semi-gloss black powder-coated finish. Includes the bracket, all necessary
hardware for mounting, and bracket brace below (C11803.)
4-Carb Sanden Compressor Mounting Bracket – C11158 5 lbs.
Based off the factory 140 bracket, this new sleek designed high-mount setup is as sturdy
as it is attractive. These brackets were designed to work with the new lighter, more efficient Sanden
compressors. They will fit any year head in the stock location and align to your stock drive pulley perfectly.
All brackets are laser cut, professionally welded, and delivered in a semi-gloss black powder-coated
finish. Includes the bracket, adjusting arm, hardware for mounting, and bracket brace below (C11803).
2 & 4-Carb A6 & Sanden Compressor Bracket Brace, Repro – C11803 1 lb.
This brace helps support GM's heavy A6 compressor, and has likely been long discarded on most factory
A/C cars, but is very much needed. This is a new shorter brace for use on all stock and Sanden compressor
brackets (all years).
A/C Pulley, 1961-69 Cars – C11845 3 lbs.
Original 6" size. Includes all needed bolts. Does Not look stock. This style is
designed after the 1964-67 pulley that bolted to the harmonic balancer. This
is preferred for the 1961-63 cars instead of the original double pulley style.
FC – See page 321.
Trunk Condenser, Low Profile – C11804 5 lbs.
Our new high efficiency, low profile condensers are designed to work with today's
R-134 refrigerants. At less than 1 inch thick, this example is ideal for a trunk-mounted
conversion. Trunk Mount Condensers are a good choice to help reduce the extra
temperature loads on the motor. Overall dimensions are 21.25" w x 11.75" h x 1" d.
Electric Fan, 9" Low Profile – C11805 4 lbs.
Want to add more air over your condenser? Do it with our low profile electric fans. Two of these 9" fans are used on
our trunk conversions and there is still plenty of room to spare. Sold each – 2 needed.
The Ultimate Guides to Vairs with AIR
This is the most Comprehensive guide to stock air conditioning in Corvairs. It covers general A/C theory. A year by year
list of changes, retro fits, refrigerants, electrical updates, compressors, condensers, FC's, etc. Approximately 80 pages,
metal spiral bound, full color cover and 4 full color pages in the center along with an index, list of resources and over
160 photos. This should tell you everything you want to know. C6562 1 lb.
C11803
C11845 C11804
C11805
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**319INDIVIDUAL AIR CONDITIONING PARTSALL YEARSSanden SD7 Compressor - C11789 20 lbs.This is True Sanden and the only one recommended for Corvairs.The best upgrade you can make to your A/C system is in the way of a more modern and efficient compressor. We currently carry the most popular choice. This is a bolt on solution to your tired Frigidaire A6. Our SD-7 is a double pulley, side discharged, o-ring fitting, silver finished unit that will work with either R-12 or R-134 refrigerant, and comes with a full 90-daywarranty. Advantages include: a higher compression ratio that improves efficiency (less load on engine), O-ring seals that work with the more modern R-134, smaller & much lighter than the stock counterpart, and this unit can turn either clockwise or counter-clockwise, making it the perfect match to the Corvair. Note: There are larger units on the market, but they take more engine power & aren't warranteed for Corvair rotation.Sanden Compressor Fittings Kit - R134 C11790 1 lb. Are you adding a Sanden Compressor to your stock A/C? Keep your engine compartment clean with these compact fittings. These tight 90 degree fittings fit both the #8 and #10 o-ring fittings on your Sanden Compressor while stepping up to the stock Corvair #10 and #12 hose sizes. See Component flowchart pages 322 & 323 for hose kits that include all of the fittings.2-Carb Sanden Compressor Mounting Bracket - C11157 4 lbs. This elegant, low profile designed 2-carb Sanden Compressor mounting bracket has proven itself through the years. These brackets were designed to work with the new lighter, more efficient Sanden compressors. They will fit any year head in the stock location and align to your stock drive pulley perfectly. This bracket will even clear the FC engine cover. All brackets are laser cut, professionally welded, and delivered in a semi-gloss black powder-coated finish. Includes the bracket, all necessary hardware for mounting, and bracket brace below (C11803.)4-Carb Sanden Compressor Mounting Bracket - C11158 5 lbs.Based off the factory 140 bracket, this new sleek designed high-mount setup is as sturdy as it is attractive. These brackets were designed to work with the new lighter, more efficient Sanden compressors. They will fit any year head in the stock location and align to your stock drive pulley perfectly. All brackets are laser cut, professionally welded, and delivered in a semi-gloss black powder-coated finish. Includes the bracket, adjusting arm, hardware for mounting, and bracket brace below (C11803).2 & 4-Carb A6 & Sanden Compressor Bracket Brace, Repro - C11803 1 lb.This brace helps support GM's heavy A6 compressor, and has likely been long discarded on most factory A/C cars, but is very much needed. This is a new shorter brace for use on all stock and Sanden compressor brackets (all years).A/C Pulley, 1961-69 Cars - C11845 3 lbs.Original 6" size. Includes all needed bolts. Does Not look stock. This style is designed after the 1964-67 pulley that bolted to the harmonic balancer. This is preferred for the 1961-63 cars instead of the original double pulley style. FC - See page 321.Trunk Condenser, Low Profile - C11804 5 lbs.Our new high efficiency, low profile condensers are designed to work with today's R-134 refrigerants. At less than 1 inch thick, this example is ideal for a trunk-mounted conversion. Trunk Mount Condensers are a good choice to help reduce the extra temperature loads on the motor. Overall dimensions are 21.25" w x 11.75" h x 1" d.Electric Fan, 9" Low Profile - C11805 4 lbs.Want to add more air over your condenser? Do it with our low profile electric fans. Two of these 9" fans are used on our trunk conversions and there is still plenty of room to spare. Sold each - 2 needed.The Ultimate Guides to Vairs with AIRThis is the most Comprehensive guide to stock air conditioning in Corvairs. It covers general A/C theory. A year by year list of changes, retro fits, refrigerants, electrical updates, compressors, condensers, FC's, etc. Approximately 80 pages, metal spiral bound, full color cover and 4 full color pages in the center along with an index, list of resources and over 160 photos. This should tell you everything you want to know. C6562 1 lb.C11803C11845 C11804C11805
Next
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498