Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
327
CORVAIR TO VW FLYWHEEL, STEEL – NEW
This is a one piece heavy duty steel flywheel precision machined from solid machine steel.
These are far superior to original VW flywheels and ready to install in your Corvair/VW conversion.
Perfectly balanced but for maximum output engines you should have your whole clutch and
pressure plate balanced as a unit. Only available as a 15 lb. unit. We include instructions
for any Machine Shop to easily machine to a weight of 13-14 lbs. for faster acceleration.
15 lbs. is great for most applications as it helps prevent "bogging down" while giving good
accelera tion. Available with or without ring gear.
109 Tooth 130 Tooth Bare (no ring gear) 14 lbs.
15 lb. Flywheel C5580 C5582 C9220
Flywheel to Crankshaft Bolts – set of 6 C787 6 oz.
VW PRESSURE PLATE
OTTO PARTS offers these remanufactured 200mm pressure plates to meet even the most
demanding applications. With the proper combination of pres sure plate, disc and flywheel,
you will have a reliable positive clutch. 1300 lb. is adequate for all but hottest.
All 9 lbs. ea. Early or Late
1300 lb. (standard w/ Kit) C5149
1600 lb. – OK if needed C8737E
2400 lb. Late Only – competition only C8738L
Bolts & Washers – Special for VW Pressure Plate to Flywheel. Set/6 C5142B 4 oz.
STOCK VW DISC
A new disc with durable facing. This is the standard disc in Corvair/VW Kits. Will give good service
in regular street use with 1600 Lb. pressure plate. Not for use with other pressure plates if you
want a smooth performance clutch that can take punishment. See "Smooth-Loc".
Stock VW Disc C5141 3 lbs.
SMOOTH-LOC VW DISC
A performance designed disc that can provide both smooth operation for street use and positive
lockup when you turn on the power. The bonded high temp facing will give excellent service
for hard driven buggies or cars. Use the 1600 lb. pressure plate for slightly modified 140’s.
Use 2400 lb. pressure plate for highly modified engine and drag type use.
Smooth-Loc VW Disc C8739 3 lbs.
BUGGIE HEADERS, REAR ENGINE
Ceramic? No Chrome? The Silver Ceramic can withstand heat. The chrome was always turning color or peeling off.
This is our most popular header. Will fit almost any comm ercial built rear engine buggie. Tuned equal lengths for big
broad mid range powerband. Super rigid flange is chamfered for positive seal. Also order 1 set of packings.
SILVER CERAMIC REAR ENGINE BUGGIE HEADERS
C7804 30 lbs.
BARE TUBE REAR ENGINE BUGGIE HEADERS – (no paint, no ceramic)
C7804B 30 lbs.
MUFFLER INSERTS (pair) Fit either of above. C8656 8 lbs.
SUPERTRAP INSERTS – Forestry Approved. Fit in end of outlet. Can't be used
with muffler inserts. C8657 (pair) 4 lbs.
EXHAUST PACKINGS
140 (4 carb) Set/6 = C371C 6 oz.
All (2 carb) Set/6 = C479C 6 oz.
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**327CORVAIR TO VW FLYWHEEL, STEEL - NEWThis is a one piece heavy duty steel flywheel precision machined from solid machine steel. These are far superior to original VW flywheels and ready to install in your Corvair/VW conversion. Perfectly balanced but for maximum output engines you should have your whole clutch and pressure plate balanced as a unit. Only available as a 15 lb. unit. We include instructions for any Machine Shop to easily machine to a weight of 13-14 lbs. for faster acceleration. 15 lbs. is great for most applications as it helps prevent "bogging down" while giving good accelera tion. Available with or without ring gear.109 Tooth 130 Tooth Bare (no ring gear) 14 lbs.15 lb. Flywheel C5580 C5582 C9220Flywheel to Crankshaft Bolts - set of 6 C787 6 oz.VW PRESSURE PLATEOTTO PARTS offers these remanufactured 200mm pressure plates to meet even the most demanding applications. With the proper combination of pres sure plate, disc and flywheel, you will have a reliable positive clutch. 1300 lb. is adequate for all but hottest. All 9 lbs. ea. Early or Late1300 lb. (standard w/ Kit) C51491600 lb. - OK if needed C8737E2400 lb. Late Only - competition only C8738LBolts & Washers - Special for VW Pressure Plate to Flywheel. Set/6 C5142B 4 oz.STOCK VW DISCA new disc with durable facing. This is the standard disc in Corvair/VW Kits. Will give good service in regular street use with 1600 Lb. pressure plate. Not for use with other pressure plates if you want a smooth performance clutch that can take punishment. See "Smooth-Loc". Stock VW Disc C5141 3 lbs.SMOOTH-LOC VW DISCA performance designed disc that can provide both smooth operation for street use and positive lockup when you turn on the power. The bonded high temp facing will give excellent service for hard driven buggies or cars. Use the 1600 lb. pressure plate for slightly modified 140's. Use 2400 lb. pressure plate for highly modified engine and drag type use. Smooth-Loc VW Disc C8739 3 lbs.BUGGIE HEADERS, REAR ENGINECeramic? No Chrome? The Silver Ceramic can withstand heat. The chrome was always turning color or peeling off.This is our most popular header. Will fit almost any comm ercial built rear engine buggie. Tuned equal lengths for big broad mid range powerband. Super rigid flange is chamfered for positive seal. Also order 1 set of packings.SILVER CERAMIC REAR ENGINE BUGGIE HEADERS C7804 30 lbs.BARE TUBE REAR ENGINE BUGGIE HEADERS - (no paint, no ceramic) C7804B 30 lbs.MUFFLER INSERTS (pair) Fit either of above. C8656 8 lbs.SUPERTRAP INSERTS - Forestry Approved. Fit in end of outlet. Can't be used with muffler inserts. C8657 (pair) 4 lbs.EXHAUST PACKINGS140 (4 carb) Set/6 = C371C 6 oz.All (2 carb) Set/6 = C479C 6 oz.
Next
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498