Home Order Catalog Online Catalog New Items Contact Us

i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
340
GEAR OIL PUMP – SUCTION "GUN"
Steel body with flexible spout for emptying and filling transmission or differentials.
TOP QUALITY GUN – Large capacity
C1693 3 lbs.
STANDARD TRANS. TOOLS
SPECIAL PLIERS
These special heavy duty transmission pliers remove external snap rings
that locate bearings and gears on shafts.
PLIERS – 8” long, maximum spread of 1 3/16". The ends of these pliers are 1/4" wide.
C5557 12 oz.
POWERGLIDE TOOLS
Modulator Valve Wrench – Allows you to easily remove and install modulator. C5294 6 oz.
P.G. LINKAGE ADJUSTMENT TOOL
Shown in the Shop Manual. Very essential for general rebuilds and replacement of shift cable.
A reproduction with instructions. Not exactly as pictured.
C5332 6 oz.
"BUTTERFLY – CLUTCH HEAD" SCREWDRIVER BITS
Inexpensive 1/4" "BITS". Use with driver handles, sockets or a wrench. Now you can have the correct tool!
NOTE: C7361 will be a real screwdriver until stock is gone.
SMALLEST HEAD – 1960-69 PG transmission – The 4 screws that hold the 1/8" steel plate to the valve body. C7743 2 oz.
FC – Some headlight units to body screws & horn. C7743 2 oz.
SMALL HEAD – 1960-64 DASH – Removing clip that holds wiring harness. C7093 2 oz.
MEDIUM HEAD – 1960-64 Car & 1961-65 FC DASH – Removing PG control unit. C7361 12 oz.
LARGE HEAD – FC BODY clutch head bolts. Large clutch head holding heater/differential cover panel, etc. C12649 4 oz.
Dash Tools
These tools allow you to remove the bezel nuts without damaging the nut or dash.
60-65 Ignition Nut Tool (3 projections) C6679A 4 oz.
66-67 Ignition Nut Tool (4 projections) C6679E 4 oz.
65-69 Headlight & Wiper Switch Nut Tool C6679F 4 oz.
button retainer
65-69 Headlight & Wiper Switch Nut Tool: Extension goes into headlight switch to prevent from sliding & scratching chrome, the other end
has a hole to go over the wiper washer button and help center the tool. C1712B 6 oz.
65-69 Headlight Nut: Under the chrome bezel, has 1/4" ratchet hole to help removal it can also be used with C1712B to help in removal.
C1711A 4 oz.
C1711A
C1712B
HEADLIGHT & WIPER SWITCH RETAINER "RING" TOOL
1960-64 Cars & FC. Remove these without damage to the retainer or your dash. C12603 8 oz.
C6679A C6679E C6679F
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**340GEAR OIL PUMP - SUCTION "GUN"Steel body with flexible spout for emptying and filling transmission or differentials.TOP QUALITY GUN - Large capacity C1693 3 lbs.STANDARD TRANS. TOOLSSPECIAL PLIERSThese special heavy duty transmission pliers remove external snap rings that locate bearings and gears on shafts. PLIERS - 8" long, maximum spread of 1 3/16". The ends of these pliers are 1/4" wide. C5557 12 oz.POWERGLIDE TOOLSModulator Valve Wrench - Allows you to easily remove and install modulator. C5294 6 oz.P.G. LINKAGE ADJUSTMENT TOOLShown in the Shop Manual. Very essential for general rebuilds and replacement of shift cable. A reproduction with instructions. Not exactly as pictured. C5332 6 oz."BUTTERFLY - CLUTCH HEAD" SCREWDRIVER BITSInexpensive 1/4" "BITS". Use with driver handles, sockets or a wrench. Now you can have the correct tool! NOTE: C7361 will be a real screwdriver until stock is gone.SMALLEST HEAD - 1960-69 PG transmission - The 4 screws that hold the 1/8" steel plate to the valve body. C7743 2 oz. FC - Some headlight units to body screws & horn. C7743 2 oz. SMALL HEAD - 1960-64 DASH - Removing clip that holds wiring harness. C7093 2 oz. MEDIUM HEAD - 1960-64 Car & 1961-65 FC DASH - Removing PG control unit. C7361 12 oz. LARGE HEAD - FC BODY clutch head bolts. Large clutch head holding heater/differential cover panel, etc. C12649 4 oz.Dash ToolsThese tools allow you to remove the bezel nuts without damaging the nut or dash. 60-65 Ignition Nut Tool (3 projections) C6679A 4 oz. 66-67 Ignition Nut Tool (4 projections) C6679E 4 oz. 65-69 Headlight & Wiper Switch Nut Tool C6679F 4 oz.button retainer65-69 Headlight & Wiper Switch Nut Tool: Extension goes into headlight switch to prevent from sliding & scratching chrome, the other end has a hole to go over the wiper washer button and help center the tool. C1712B 6 oz.65-69 Headlight Nut: Under the chrome bezel, has 1/4" ratchet hole to help removal it can also be used with C1712B to help in removal. C1711A 4 oz.C1711AC1712BHEADLIGHT & WIPER SWITCH RETAINER "RING" TOOL1960-64 Cars & FC. Remove these without damage to the retainer or your dash. C12603 8 oz.C6679A C6679E C6679F
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2022 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498