Home Order Catalog Online Catalog New Items Contact Us
 Prev 
4
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
VITON O-RINGS
VITON is a trade name for a rubber compound that: (A) resists the tendency to “set” to the installed shape; (B) firmer than original rubber seals; (C) high heat
resistance – has maximum temperature of about 450°-500° (that’s 100-150° higher than original GM o-rings); (D) very resistant to oil and fuel (we are also
offering Sillcone, although it does have a higher temperature range, it is not as oil resistant as VITON). We purchase 1,000s of top quality VITON o-rings at a
time and pass the savings onto you. We sell BROWN VITON o-rings so you will never get them mixed up. Also available individually if you lose one.
ENGINE DISCOUNT !
see Blue pg. MK-2
The “I’m Just Pulling My Engine & Bellhousing” GASKET SET
For VITON bell housing seal ADD V to the end of part number. ON WEBSITE – Click on any number in the chart & the "V" option will display below.
See pg. 1 to be sure you are
ordering for the correct year.
STANDARD
TRANSMISSION
POWERGLIDE *
TRANSMISSION
1960-63 ALL C9231 1 lb. C9232 1 lb.
1964-69 (except 140 HP) C9233 1 lb. C9232 1 lb.
1965-69 140 HP C9234 1 lb. C9235 1 lb.
This part number will give you the minimum seals and
gaskets you need to pull your engine and remove the
bell housing. INCLUDES: oil pan, bell housing, oil filter/
adaptor, bell housing seal, torque converter seal or input
seal and crossover packings.
*PG kits also include C878 cable o-ring.
VITON Crankshaft Seals – Add V
We now have both the BELL HOUSING and CRANK PULLEY SEALS in brown VITON. ALL CLARK KITS listed
come with the original style seals • • • BUT you may ADD V to the END OF ANY GASKET SET OR MULTI-
KIT that includes these seals and they will be VITON. l am told that most aircraft engine seals are VITON.
(Our VITON crankshaft seals are produced by our regular seal manufacturer and look just like the originals
EXCEPT that they are made with DUPONT brown VITON.) See page 7A for INDIVIDUAL SEALS.
See page 3 for correct installation of all engine seals.
PUSH TUBE & ROCKER STUD VITON O-RINGS: Set of 24 push tube and 12 rocker stud “O” rings.
CLARK VITONS
Full Set (Brown)
CLARK VITONS
1/2 Set
CLARK VITONS
Individual
SILICONE
Full Set (Red)
C4314 4 oz. C4314X 2 oz.
Rocker Stud (smaller) C4314A 1 oz.
Push Tube (larger) C4314L 1 oz.
C4310 4 oz.
TOOLS for easy removal of push tubes: See page 333.
BULK VITON O-RINGS: Viton Push Rod Tubes, 120 O-RINGS C5453 8 oz.
Viton Rocker Studs, 60 O-RINGS C5454 4 oz.
OTHER VITON SEALS: See bottom of page 7 for individual o-rings.
OIL COOLER SEALS: Viton, All 1960-69, Set of 2 C123C 2 oz./set
0-RING SEALS: Viton, Set of 3 for fuel pump, crankcase vent tube to top engine housing and for tube that fits Into that. C123B 2 oz./set
OIL FILLER TUBE 0-RING SEAL: Viton, for Vans (FC) and Wagons C47VM 1 oz.
VITON o-rings are in
many SETS.
Check rst!
4iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**VITON O-RINGSVITON is a trade name for a rubber compound that: (A) resists the tendency to "set" to the installed shape; (B) firmer than original rubber seals; (C) high heat resistance - has maximum temperature of about 450?-500? (that's 100-150? higher than original GM o-rings); (D) very resistant to oil and fuel (we are also offering Sillcone, although it does have a higher temperature range, it is not as oil resistant as VITON). We purchase 1,000s of top quality VITON o-rings at a time and pass the savings onto you. We sell BROWN VITON o-rings so you will never get them mixed up. Also available individually if you lose one. ENGINE DISCOUNT !see Blue pg. MK-2The "I'm Just Pulling My Engine & Bellhousing" GASKET SETFor VITON bell housing seal ADD V to the end of part number. ON WEBSITE - Click on any number in the chart & the "V" option will display below.See pg. 1 to be sure you are ordering for the correct year.STANDARD TRANSMISSIONPOWERGLIDE *TRANSMISSION1960-63 ALL C9231 1 lb. C9232 1 lb.1964-69 (except 140 HP) C9233 1 lb. C9232 1 lb.1965-69 140 HP C9234 1 lb. C9235 1 lb.This part number will give you the minimum seals and gaskets you need to pull your engine and remove the bell housing. INCLUDES: oil pan, bell housing, oil filter/adaptor, bell housing seal, torque converter seal or input seal and crossover packings.*PG kits also include C878 cable o-ring.VITON Crankshaft Seals - Add V We now have both the BELL HOUSING and CRANK PULLEY SEALS in brown VITON. ALL CLARK KITS listed come with the original style seals o o o BUT you may ADD V to the END OF ANY GASKET SET OR MULTI- KIT that includes these seals and they will be VITON. l am told that most aircraft engine seals are VITON. (Our VITON crankshaft seals are produced by our regular seal manufacturer and look just like the originals EXCEPT that they are made with DUPONT brown VITON.) See page 7A for INDIVIDUAL SEALS. See page 3 for correct installation of all engine seals. PUSH TUBE & ROCKER STUD VITON O-RINGS: Set of 24 push tube and 12 rocker stud "O" rings. CLARK VITONSFull Set (Brown)CLARK VITONS1/2 SetCLARK VITONSIndividualSILICONEFull Set (Red)C4314 4 oz. C4314X 2 oz.Rocker Stud (smaller) C4314A 1 oz.Push Tube (larger) C4314L 1 oz.C4310 4 oz.TOOLS for easy removal of push tubes: See page 333. BULK VITON O-RINGS: Viton Push Rod Tubes, 120 O-RINGS C5453 8 oz. Viton Rocker Studs, 60 O-RINGS C5454 4 oz.OTHER VITON SEALS: See bottom of page 7 for individual o-rings. OIL COOLER SEALS: Viton, All 1960-69, Set of 2 C123C 2 oz./set 0-RING SEALS: Viton, Set of 3 for fuel pump, crankcase vent tube to top engine housing and for tube that fits Into that. C123B 2 oz./set OIL FILLER TUBE 0-RING SEAL: Viton, for Vans (FC) and Wagons C47VM 1 oz. VITON o-rings are in many SETS.Check ?rst!
Next
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498