Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
50
Turbo Parts
PICTURE # – REFER TO PICTURE DIAGRAM PAGE 46.
9. Clamp: Gear clamp for hose (2 needed) – not original style. C11A 2 oz.
10. Carb.: See Parts page 48 & 49.
11. Air Filter : Housing – see USED page 353.
Air Filter Elements: 196264 used a foam filter over a screen.
Our foam filter will fit 196266. In 1965, they switched to a paper element
which will fit 196266.
FOAM Filter & Screen C5794 1 lb.
Repro PAPER Filter C7 1 lb.
Washable "Paper" Filter (hot soapy water) C9529 1 lb.
Includes spray oil; CAN'T SHIP AIR.
Turbo Air Filter Housing Seals
Yes, the air cleaner is supposed to have a positive seal where it attaches to the carburetor. There are 2 styles.
The felt was used only on 1962 painted cleaners. All others used the O-ring.
View of end of air filter that attaches to carb.
(see below for the bolt)
O-Ring Style – VITON: Goes in groove ¼" in from outer shell. C5031 1 oz.
Felt Style: Will be ¾" in from outer shell. Includes instructions. C5030 2 oz.
Turbo Air Cleaner Attaching Bolt & Nut: At carburetor end. Bolt is slotted for screwdriver (usually rusty and slot is shot).
Either bolt will fit either cleaner.
For Black Air Cleaners – no chrome C5025 Discontinued
For Chrome Air Cleaners – chrome bolt & nut C5026 Discontinued
12. Wingnuts : Air filter end. 196264 (original style) C3757 2 oz.
196266 (plated) C2182 Discontinued
Turbo Hoses
Vacuum Hose Set: Head to distributor, choke tube to air cleaner, chrome crank vent to air cleaner, chrome crank vent to tube to Turbo compressor.
C478 1 lb.
Hi-Temp Turbo Drain Hose: Our Turbo drain hose is a special hi-temp, oil resistant, reinforced rubber. 196266 Turbo C365A 2 oz.
Clamps: For oil drain hose. NOTE: At least 5 types of clamps were used (that we know of) over the years.
"Original" spring style (2 needed) C8491 2 oz.
Gear style (2 needed) C5658 2 oz.
Turbo Outlet Chrome Intake Hose: Special hose. C11 2 oz.
ACCELERATOR LINKAGE – '62–66
PICTURE #
1. Linkage – Swivel: See USED page 354.
2. Nuts & Lock Washers: For swivel linkage on Turbo carburetor. Set of 2. C5023 2 oz./set
3. Complete Bolt Unit for Turbo Carburetor Linkage: 196266 Turbo. C5024 1 oz.
4. Throttle Return Spring: 196266 Turbo. Often wears thru where it attaches. C10 2 oz.
5. Swivel C7130 2 oz.
6. Throttle Rod : Not available.
Turbo Chrome Crossovers – USED only – See page 354
1965 66 Turbo Hose Oil Bath
A repro with the inside hoops.
Color is dark gray/black.
C9894 10 oz.
C7
C3757
C2182
C8491
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**50Turbo PartsPICTURE # - REFER TO PICTURE DIAGRAM PAGE 46.9. Clamp: Gear clamp for hose (2 needed) - not original style. C11A 2 oz.10. Carb.: See Parts page 48 & 49.11. Air Filter : Housing - see USED page 353.Air Filter Elements: 1962-64 used a foam filter over a screen.Our foam filter will fit 1962-66. In 1965, they switched to a paper element which will fit 1962-66.FOAM Filter & Screen C5794 1 lb.Repro PAPER Filter C7 1 lb.Washable "Paper" Filter (hot soapy water) C9529 1 lb.Includes spray oil; CAN'T SHIP AIR.Turbo Air Filter Housing SealsYes, the air cleaner is supposed to have a positive seal where it attaches to the carburetor. There are 2 styles.The felt was used only on 1962 painted cleaners. All others used the O-ring. View of end of air filter that attaches to carb. (see below for the bolt) O-Ring Style - VITON: Goes in groove 1/4 " in from outer shell. C5031 1 oz. Felt Style: Will be 3/4 " in from outer shell. Includes instructions. C5030 2 oz.Turbo Air Cleaner Attaching Bolt & Nut: At carburetor end. Bolt is slotted for screwdriver (usually rusty and slot is shot). Either bolt will fit either cleaner. For Black Air Cleaners - no chrome C5025 Discontinued For Chrome Air Cleaners - chrome bolt & nut C5026 Discontinued12. Wingnuts : Air filter end. 1962-64 (original style) C3757 2 oz. 1962-66 (plated) C2182 DiscontinuedTurbo HosesVacuum Hose Set: Head to distributor, choke tube to air cleaner, chrome crank vent to air cleaner, chrome crank vent to tube to Turbo compressor. C478 1 lb.Hi-Temp Turbo Drain Hose: Our Turbo drain hose is a special hi-temp, oil resistant, reinforced rubber. 1962-66 Turbo C365A 2 oz.Clamps: For oil drain hose. NOTE: At least 5 types of clamps were used (that we know of) over the years. "Original" spring style (2 needed) C8491 2 oz. Gear style (2 needed) C5658 2 oz.Turbo Outlet Chrome Intake Hose: Special hose. C11 2 oz.ACCELERATOR LINKAGE - '62-66PICTURE #1. Linkage - Swivel: See USED page 354.2. Nuts & Lock Washers: For swivel linkage on Turbo carburetor. Set of 2. C5023 2 oz./set3. Complete Bolt Unit for Turbo Carburetor Linkage: 1962-66 Turbo. C5024 1 oz.4. Throttle Return Spring: 1962-66 Turbo. Often wears thru where it attaches. C10 2 oz.5. Swivel C7130 2 oz.6. Throttle Rod : Not available. Turbo Chrome Crossovers - USED only - See page 3541965 -66 Turbo Hose Oil BathA repro with the inside hoops. Color is dark gray/black.C9894 10 oz.C7C3757C2182C8491
Next
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498