Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
80
BATTERY HOLD DOWN
A metal retainer went across the battery and was held down with a hooked bolt (and wingnut) and a short bolt.
These are priced less and will also fit 1961-64 Cars (need to order 1 shorter hook C3031A & 1 C3031). It will
also fit 1961-65 Vans (FC) but 1 hook (C4673) will have to be shortened 1".
These had a metal retainer that went across the battery. The Cars were held down with 2 hooked bolts and
wingnuts and the Vans had 2 longer hooked bolts with wing nuts. These will also fit 64 Cars and 64-65 Vans.
These originally used a plastic piece that went across the top of the battery and was held down
by 2 hooked bolts and wingnuts on the Cars and 2 longer hooked bolts on the Vans. You
may also use the one listed above for 61-63 Cars and Vans or the one listed for 1960 Cars.
1965 Cars also used a metal retainer across the battery. One side was held down with a hooked bolt that went
through a metal loop. The other side was a regular long bolt that threaded into a welded nut.
These batteries were held in differently. A bracket was welded to the body. The battery was pushed up against
that bracket (stop) and then a metal piece was put against the engine side of the battery and a bolt went
through it. As it was tightened, it pulled down on the retainer which pushed against the battery.
BATTERY HOLD DOWN RETAINERS
For Stock Size Batteries – Also See Bolts Below
1960 Reproduction: With acid resistant black coating. C7535 1 lb.
(will work on 61-64 Cars & 61-65 FC) Note: FC will have to shorten (1) C4673 hook.
1961-63 Reproduction: Cars & Vans; with acid resistant black coating. C5102 1 lb.
1964 Cars & 64-65 Vans Repro: Exact plastic repro. C10044 6 oz.
1965 Reproduction: With acid resistant black coating. C5103 1 lb.
1966-69 Metal "Pusher" C513 6 oz.
BATTERY BOLTS
All the correct size, ready to install. These are hard to get sizes, have them on hand.
1960: 2 different ones needed Long Hooked One C5096 6 oz.
Short (bolt) C5097 4 oz.
1961-62 Wagons: 2 needed C6825 6 oz.
1961-64 Cars (Exc. Wagons): 2 needed Hooks C3031 6 oz.
1961-64 Cars: (1 needed only when using a 1960 style hold down.) C3031A 5 oz.
1961-65 Vans: 2 needed Hooks C4673 6 oz.
1965 Cars: 2 different ones needed Hook C514 6 oz.
Bolt C514X 6 oz.
1966-69 Cars: For metal "pusher" C3700 2 oz.
WINGNUT: For all hooked battery bolts. C4321A 2 oz.
BATTERY HOLD DOWN WASHERS: These are used on top of the original hold downs on all early cars & FC's
(except the original 1964 plastic hold down, but we suggest them for 64 also). Sold set of 2.
1960-63, 65 Cars & 61-63 FC C2564W 2 oz.
1964 Cars & 64-65 FC C4321X 2 oz.
BATTERY TRAYS
Black plastic tray that holds battery to catch & direct any spilled battery acid. The original thickness battery tray
material is hard to find. Clark's chose to go to 20% THICKER.
1960-64 Tray: Reproduction (Also fits 61-65 Vans) C6826 12 oz.
1965-69 Tray: ReproductIon C511R 12 oz.
FC Battery Drain & Miscellaneous Parts
A. Plastic insert in tray. Exact repro. C9814 1 oz.
B. Hose C7736 4 oz.
C. Grommet in lower panel. Nice replacement, but not exact. C12653 2 oz.
D. FC BATTERY CABLE rubber coated RETAINER – rubber coated metal retainer holds the battery cable & the cable going
to the voltage regulator. It's near the battery box & is usually rusty or rubber is peeling. C13052 2 oz.
E. Battery box & rubber coated retainer BOLTS – bolts to attach battery box & retainer. Set of 5 C13053 4 oz.
'60-'64
C6826
'65-'69
C511R
1960 CARS
1961-63 CARS
& 61-63 VANS
1964 CARS &
64-65 VANS
1965 CARS
1966-69 CARS
More FC Battery Parts
Page 79
C5103
C9814
C7736
C12653
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**80BATTERY HOLD DOWNA metal retainer went across the battery and was held down with a hooked bolt (and wingnut) and a short bolt. These are priced less and will also fit 1961-64 Cars (need to order 1 shorter hook C3031A & 1 C3031). It will also fit 1961-65 Vans (FC) but 1 hook (C4673) will have to be shortened 1".These had a metal retainer that went across the battery. The Cars were held down with 2 hooked bolts and wingnuts and the Vans had 2 longer hooked bolts with wing nuts. These will also fit 64 Cars and 64-65 Vans.These originally used a plastic piece that went across the top of the battery and was held down by 2 hooked bolts and wingnuts on the Cars and 2 longer hooked bolts on the Vans. You may also use the one listed above for 61-63 Cars and Vans or the one listed for 1960 Cars.1965 Cars also used a metal retainer across the battery. One side was held down with a hooked bolt that went through a metal loop. The other side was a regular long bolt that threaded into a welded nut.These batteries were held in differently. A bracket was welded to the body. The battery was pushed up against that bracket (stop) and then a metal piece was put against the engine side of the battery and a bolt went through it. As it was tightened, it pulled down on the retainer which pushed against the battery.BATTERY HOLD DOWN RETAINERSFor Stock Size Batteries - Also See Bolts Below1960 Reproduction: With acid resistant black coating. C7535 1 lb. (will work on 61-64 Cars & 61-65 FC) Note: FC will have to shorten (1) C4673 hook.1961-63 Reproduction: Cars & Vans; with acid resistant black coating. C5102 1 lb.1964 Cars & 64-65 Vans Repro: Exact plastic repro. C10044 6 oz.1965 Reproduction: With acid resistant black coating. C5103 1 lb.1966-69 Metal "Pusher" C513 6 oz.BATTERY BOLTSAll the correct size, ready to install. These are hard to get sizes, have them on hand.1960: 2 different ones needed Long Hooked One C5096 6 oz. Short (bolt) C5097 4 oz.1961-62 Wagons: 2 needed C6825 6 oz.1961-64 Cars (Exc. Wagons): 2 needed Hooks C3031 6 oz.1961-64 Cars: (1 needed only when using a 1960 style hold down.) C3031A 5 oz.1961-65 Vans: 2 needed Hooks C4673 6 oz.1965 Cars: 2 different ones needed Hook C514 6 oz. Bolt C514X 6 oz.1966-69 Cars: For metal "pusher" C3700 2 oz.WINGNUT: For all hooked battery bolts. C4321A 2 oz. BATTERY HOLD DOWN WASHERS: These are used on top of the original hold downs on all early cars & FC's (except the original 1964 plastic hold down, but we suggest them for 64 also). Sold set of 2. 1960-63, 65 Cars & 61-63 FC C2564W 2 oz. 1964 Cars & 64-65 FC C4321X 2 oz.BATTERY TRAYSBlack plastic tray that holds battery to catch & direct any spilled battery acid. The original thickness battery tray material is hard to find. Clark's chose to go to 20% THICKER. 1960-64 Tray: Reproduction (Also fits 61-65 Vans) C6826 12 oz. 1965-69 Tray: ReproductIon C511R 12 oz.FC Battery Drain & Miscellaneous PartsA. Plastic insert in tray. Exact repro. C9814 1 oz.B. Hose C7736 4 oz.C. Grommet in lower panel. Nice replacement, but not exact. C12653 2 oz. D. FC BATTERY CABLE rubber coated RETAINER - rubber coated metal retainer holds the battery cable & the cable going to the voltage regulator. It's near the battery box & is usually rusty or rubber is peeling. C13052 2 oz. E. Battery box & rubber coated retainer BOLTS - bolts to attach battery box & retainer. Set of 5 C13053 4 oz. '60-'64C6826'65-'69C511R1960 CARS1961-63 CARS& 61-63 VANS1964 CARS & 64-65 VANS1965 CARS1966-69 CARSMore FC Battery PartsPage 79C5103C9814C7736C12653
Next
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498