Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
1965-69
1965-69
CARS
160
ENGINE MOUNTS (TRANS. MOUNTS – See pg. 167A)
ENGINE – At the back of the car by the fan pulley. Rubber bonded to metal that can crack, rot, and weaken with age. It is all that holds rear of engine up!
NOTE: 1965-69 – A lot has been written about the superior 1965 style being better, but our own experience has shown they are more prone to
failure that is difficult to detect because the bonded part is hidden from view. Also note that the 1966-69 style (shown below) has a positive steel
safety rod there in case of failure.
TRANS. – 2 transmission mounts at the front of the transmission makes up the rest of the mounting system. Order bolts too! Check mounts for cracks in the
rubber or a collapsed state that allows transmission to tilt.
1960 Cars & 61-65 FC (Vans)
ENGINE (MOTOR) MOUNTS
PICTURE # Disc. parts – see "NOS" on website
5. NUT C726 1 oz.
15. COTTER PIN C6443 1/2 oz.
SET of 5 C726A 2 oz./set
16. WASHER C4724 2 oz.
17. BOLT C1585 4 oz.
18. RETAINER C1586 Discontinued
18a. RETAINER C1588 Discontinued
18b. RETAINER C1589 Discontinued
19. RUBBER MOUNT (Upper) – Reproduction C1144T 6 oz.
20. SLEEVE C1587 4 oz.
21. RUBBER MOUNT (Bottom) C1144B 4 oz.
22. WASHER – See "F" Below C4726 2 oz.
NEW REAR MOTOR MOUNTS
1961-64 CARS – NEW MOTOR MOUNTS: Factory controlled production, no cores to return
and cost less than rebuilds! Also see Multi-Kits – Blue page MK-14.
1961-63 cars (exc. A/C) C8056R 4 lbs.
1961-63 Cars with A/C C8056AR 4 lbs.
1964 Cars All C8057R 4 lbs.
1961-64 HARDWARE
A – BOLTS: Hold mount to body. 2 needed.
1961-64 Cars "Gr 8" C2162 4 oz. ea.
B – NUT for BOTTOM STUD C726 1 oz.
C – COTTER PIN for NUT C6443 ½ oz. .
D – MOTOR MOUNT INTERIOR SPACER: 1961-64 – keeps mounting bolts from
collapsing mount. REPRO C12876 4 oz.
E – MOUNT PLATE: 1961-64 – often missing. REPRO 1961-63 C12878 4 oz.
1964 C12877 4 oz.
F – WASHER: An important washer! (Don't use standard washers – way undersized and too thin). Even most original washers are bent & distorted.
Our new washer is correct thickness for all 61-64 Cars and 61-65 FC. ¼" larger od. for 1964 Cars & ½" smaller od. for 1960 Cars & 61-65 FC,
but excellent replacement for all. Mount Washer (1-¼" od., 7/16" id., x 9/64 ") C4726 2 oz.
1965-69 CARS – NEW MOTOR MOUNTS: Factory controlled production, no cores to return and cost less than rebuilds!
Also see Multi-Kits – Blue page. MK-14. NOTE: The original 1965 style will only be available as a rebuilt unit.
1965 CARS: These are quite rare as most people over the years have used the 66-69 style. If out, we will not substitute the 1966-69 style unless you
request it. Only offered as Rebuilt Unit with refundable core included in the price (we suggest New 66-69 style).
1965 REBUILT C8058 8 lbs.
1966-69 CARS: (will also fit 1965's) These mounts have caused a great deal of confusion as to if they have "gone bad". Before being installed,
they have the pyramid shape. Once installed, the weight of the motor brings them down until they are just about "flat" across the top.
When they are "bad", the center will be sunken down and should be replaced. New 1966-69 style (fits 1965) C8059R 8 lbs.
1965-69 HARDWARE
A – SPECIAL HARDENED SELF-LOCKING NUT: Replace! Sold Set of 2 C1224 2 oz./set
B – SPECIAL WASHER FOR 2 STUDS C1590 4 oz.
C – BOLTS: Hold motor mount to body. "1" = 4 bolts ("Gr 8") and washers C2163 4 oz./set
New Non-Original MOTOR MOUNT65-69 Cars
Higher torque and load capacity, larger vulcanized area, slightly stiffer than original.
FAIL SAFE design. Made in U.S.A. Mounts with original hardware.
EXACT FIT. HEAVY DUT Y MOUNT C11536 6 lbs.
Jacking Note:
Lifting a Corvair by jacking under the differential or engine puts extreme
stress on the motor mounts and may cause failure of even new mounts.
MULTI-KITS
see Blue pg. MK-14
1961-64
CARS
1965-69 Mount bolts (C) to
frame only torque to 30 ft. lb.
– bottom nuts to 40 ft. lb.
C11536
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**1965-691965-69 CARS160ENGINE MOUNTS (TRANS. MOUNTS - See pg. 167A)ENGINE - At the back of the car by the fan pulley. Rubber bonded to metal that can crack, rot, and weaken with age. It is all that holds rear of engine up! NOTE: 1965-69 - A lot has been written about the superior 1965 style being better, but our own experience has shown they are more prone to failure that is difficult to detect because the bonded part is hidden from view. Also note that the 1966-69 style (shown below) has a positive steel safety rod there in case of failure.TRANS. - 2 transmission mounts at the front of the transmission makes up the rest of the mounting system. Order bolts too! Check mounts for cracks in the rubber or a collapsed state that allows transmission to tilt.1960 Cars & 61-65 FC (Vans)ENGINE (MOTOR) MOUNTS PICTURE # Disc. parts - see "NOS" on website 5. NUT C726 1 oz.15. COTTER PIN C6443 1/2 oz. SET of 5 C726A 2 oz./set16. WASHER C4724 2 oz.17. BOLT C1585 4 oz.18. RETAINER C1586 Discontinued18a. RETAINER C1588 Discontinued18b. RETAINER C1589 Discontinued19. RUBBER MOUNT (Upper) - Reproduction C1144T 6 oz.20. SLEEVE C1587 4 oz.21. RUBBER MOUNT (Bottom) C1144B 4 oz.?22. WASHER - See "F" Below C4726 2 oz.NEW REAR MOTOR MOUNTS1961-64 CARS - NEW MOTOR MOUNTS: Factory controlled production, no cores to return and cost less than rebuilds! Also see Multi-Kits - Blue page MK-14. 1961-63 cars (exc. A/C) C8056R 4 lbs. 1961-63 Cars with A/C C8056AR 4 lbs. 1964 Cars All C8057R 4 lbs.1961-64 HARDWAREA - BOLTS: Hold mount to body. 2 needed. 1961-64 Cars "Gr 8" C2162 4 oz. ea.B - NUT for BOTTOM STUD C726 1 oz. C - COTTER PIN for NUT C6443 1/2 oz. .D - MOTOR MOUNT INTERIOR SPACER: 1961-64 - keeps mounting bolts from collapsing mount. REPRO C12876 4 oz.E - MOUNT PLATE: 1961-64 - often missing. REPRO 1961-63 C12878 4 oz. 1964 C12877 4 oz.?F - WASHER: An important washer! (Don't use standard washers - way undersized and too thin). Even most original washers are bent & distorted. Our new washer is correct thickness for all 61-64 Cars and 61-65 FC. 1/4 " larger od. for 1964 Cars & 1/2 " smaller od. for 1960 Cars & 61-65 FC, but excellent replacement for all. Mount Washer (1- 1/4 " od., 7/16" id., x 9/64 ") C4726 2 oz.1965-69 CARS - NEW MOTOR MOUNTS: Factory controlled production, no cores to return and cost less than rebuilds! Also see Multi-Kits - Blue page. MK-14. NOTE: The original 1965 style will only be available as a rebuilt unit. 1965 CARS: These are quite rare as most people over the years have used the 66-69 style. If out, we will not substitute the 1966-69 style unless you request it. Only offered as Rebuilt Unit with refundable core included in the price (we suggest New 66-69 style). 1965 REBUILT C8058 8 lbs.1966-69 CARS: (will also fit 1965's) These mounts have caused a great deal of confusion as to if they have "gone bad". Before being installed, they have the pyramid shape. Once installed, the weight of the motor brings them down until they are just about "flat" across the top. When they are "bad", the center will be sunken down and should be replaced. New 1966-69 style (fits 1965) C8059R 8 lbs.1965-69 HARDWAREA - SPECIAL HARDENED SELF-LOCKING NUT: Replace! Sold Set of 2 C1224 2 oz./setB - SPECIAL WASHER FOR 2 STUDS C1590 4 oz. C - BOLTS: Hold motor mount to body. "1" = 4 bolts ("Gr 8") and washers C2163 4 oz./set New Non-Original MOTOR MOUNT - 65-69 CarsHigher torque and load capacity, larger vulcanized area, slightly stiffer than original. FAIL SAFE design. Made in U.S.A. Mounts with original hardware. EXACT FIT. HEAVY DUT Y MOUNT C11536 6 lbs.Jacking Note:Lifting a Corvair by jacking under the differential or engine puts extreme stress on the motor mounts and may cause failure of even new mounts.MULTI-KITSsee Blue pg. MK-141961-64 CARS1965-69 Mount bolts (C) to frame only torque to 30 ft. lb. - bottom nuts to 40 ft. lb.C11536
Next
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498