Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
73
Van Accelerator Linkage
Accelerator Cable Note: 1961 – through about Feb 1961 used the "1st design" cable which stopped at the differential pivot.
We believe the rest of the 196165 all used the cable that ended at the carb cross shaft. Over the years, some "1st Design"
FC were switched to the later style. Check yours before ordering! Check photo captions!
1. Washer: Sold set of 2. C4584 1 oz./set
2. Fiber Washers: Above and below seal. Sold set of 2. C797A 2 oz./set
3. Felt Seal: Accelerator through floor. C797 2 oz.
4. Accelerator Pedal: May vary slightly from original (check availability).
Exact Repro 196163 C795 1 lb.
196465 C4955 1 lb.
5. Screw : Special for accelerator pedal. Sold set of 2.
Exact Original clutch head C4585C 2 oz./set
Usable replacement slotted head C4585 2 oz. /set
6. Cotter Pin C4586 1 oz.
7. Pivot Pin 196163 C799 4 oz.
7½. Front Accelerator Cable Return Spring (Carb return spring see #23)
1961 First Design Accelerator (Manual & PG) – 5½" C1235 4 oz.
1961-65 ALL with Cable to Carb Cross Shaft – 3½" C499 4 oz.
7¾. Cotter Pin: Some years used this through the front valance panel & the spring went through
the cotter pin eye. C1235C 1 oz.
8. Lever: Holes often wear. 196163 CX1629 8 oz.
8½. "E" Clip: Sold set of 2. (some used COT TER PIN) C727L 1 oz./set
9. Cotter Pin : Front cable C4587 1 oz.
Set of 5 C726A 1 oz./set
10. Washer: Front cable. C7332 1 oz.
11. Accelerator Cable: See note at top about "1st Design". If your cable is old, consider carrying
a spare or replacing.
1961 "1st Design" Accel Cable (ends at differential pivot) C794E 2 lbs.
196165 Accelerator Cable (ends at carb cross shaft) C794L 2 lbs.
12. Retainer Clip C3787 1 oz.
13. Adjusting Swivel C2257 2 oz.
14. Adjusting Rod C2254 4 oz.
15. Adjusting Keeper C2255 1 oz.
16. Screw for Keeper C2256 1 oz.
17. Nylon Sleeve C549 1 oz.
18. Rubber Bushing C547 1 oz.
19. Special Washer: Sold set of 2. C549W 1 oz./set
20. "C" Clip: Sold set of 5. C727 1 oz./set
21. Special Washers: Throttle pivot shaft. Sold set of 2. C727W 1 oz./set
22. Set of 3 Attaching Bolts with Lock Washers C11016 4 oz./set
23. Return Spring at Carb (cross shaft)
1961 1st Design Accel. (manual & PG) C1237 4 oz.
196165 with Cable to Carb Cross Shaft (exc. PG) C499 4 oz.
196165 PG with Cable to Carb Cross Shaft C1237 4 oz.
24. Swivel C552 2 oz.
PICTURE #
These were originally a bronze bushing
Part of
Accelerator
Cable
NOTE: If your FC had a throttle
rod into engine and now you use
a cable – the rod hole can
be plugged with C4227 2 oz.
C795
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**73Van Accelerator LinkageAccelerator Cable Note: 1961 - through about Feb 1961 used the "1st design" cable which stopped at the differential pivot. We believe the rest of the 1961-65 all used the cable that ended at the carb cross shaft. Over the years, some "1st Design" FC were switched to the later style. Check yours before ordering! Check photo captions!1. Washer: Sold set of 2. C4584 1 oz./set 2. Fiber Washers: Above and below seal. Sold set of 2. C797A 2 oz./set 3. Felt Seal: Accelerator through floor. C797 2 oz. 4. Accelerator Pedal: May vary slightly from original (check availability). Exact Repro 1961-63 C795 1 lb. 1964-65 C4955 1 lb.5. Screw : Special for accelerator pedal. Sold set of 2. Exact Original clutch head C4585C 2 oz./set Usable replacement slotted head C4585 2 oz. /set 6. Cotter Pin C4586 1 oz.7. Pivot Pin 1961-63 C799 4 oz.7 1/2 . Front Accelerator Cable Return Spring (Carb return spring see #23) 1961 First Design Accelerator (Manual & PG) - 5 1/2 " C1235 4 oz. 1961-65 ALL with Cable to Carb Cross Shaft - 3 1/2 " C499 4 oz.7 3/4 . Cotter Pin: Some years used this through the front valance panel & the spring went through the cotter pin eye. C1235C 1 oz.8. Lever: Holes often wear. 1961-63 CX1629 8 oz. 8 1/2 . "E" Clip: Sold set of 2. (some used COT TER PIN) C727L 1 oz./set 9. Cotter Pin : Front cable C4587 1 oz. Set of 5 C726A 1 oz./set 10. Washer: Front cable. C7332 1 oz.11. Accelerator Cable: See note at top about "1st Design". If your cable is old, consider carrying a spare or replacing. 1961 "1st Design" Accel Cable (ends at differential pivot) C794E 2 lbs. 1961-65 Accelerator Cable (ends at carb cross shaft) C794L 2 lbs.12. Retainer Clip C3787 1 oz.13. Adjusting Swivel C2257 2 oz.14. Adjusting Rod C2254 4 oz.15. Adjusting Keeper C2255 1 oz. 16. Screw for Keeper C2256 1 oz.17. Nylon Sleeve C549 1 oz.18. Rubber Bushing C547 1 oz.19. Special Washer: Sold set of 2. C549W 1 oz./set20. "C" Clip: Sold set of 5. C727 1 oz./set21. Special Washers: Throttle pivot shaft. Sold set of 2. C727W 1 oz./set22. Set of 3 Attaching Bolts with Lock Washers C11016 4 oz./set23. Return Spring at Carb (cross shaft) 1961 1st Design Accel. (manual & PG) C1237 4 oz. 1961-65 with Cable to Carb Cross Shaft (exc. PG) C499 4 oz. 1961-65 PG with Cable to Carb Cross Shaft C1237 4 oz.24. Swivel C552 2 oz.PICTURE #These were originally a bronze bushingPart of Accelerator CableNOTE: If your FC had a throttle rod into engine and now you use a cable - the rod hole canbe plugged with C4227 2 oz. C795
Next
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498