Home Order Catalog Online Catalog New Items Contact Us
 Prev 
3
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
The “I Want EVERY Gasket” ENGINE GASKET SET
OKAY – YOU ASKED FOR IT! One part number that will give you every single possible replaceable gasket, head gasket, seals, exhaust packings, manifold “col-
lars”, valve cover gaskets, foam shroud seals, Viton o-rings, teflon valve stem seals, dipstick boot or grommet, all air cleaner gaskets, seals, carb. base spac-
ers and gaskets (does not include carb. rebuild kits). Basically this KIT includes everything (and more) listed as Part “A”, “B”, “C” and “Optional” listed
on pages 5 & 6. All KITS come with CORK oil pan gaskets and dipstick boot (grommet). See page 1 - be sure you are ordering for the right year. The only
replaceable engine rubber that WILL NOT be included is the “perimeter” engine seal (weatherstrip) and rubber grommets. You save about 5% OFF individual
part prices. Each SET will be individually boxed with a list of each part. All components of these SETS will be our very best top quality – NO COMPROMISEI
Year (All 3 Lbs. each)
Complete “I Want Everything Gasket Set”
(With Regular Head Gaskets)
Gasket Set (With NO Head Gaskets)
Order Big Bore Gaskets Separately - Pg 7
1960 Cars C6355A C6356
1961-63 Cars (exc. Turbo) C6357 C6358
1961-64 FC & 1961-62 Lakewood C6361 C6362
1965 FC C6361A C6362
1964 Cars (exc. Turbo & A/C) C6359 C6360
1964 Cars with Air Conditioning Use C6357 Use C6358
1962-1964 Turbo (includes Turbo base & outlet
gasket, chrome inlet to head gaskets, exhaust pipe
thru shroud collars)
C6363 C6364
1965-69 Cars (exc. 140, Turbo & 64 A/C) C6365 C6366
1965 with Air Conditioning (65 Style) C6367 C6368
1965-66 Turbo (See note for 62-64 Turbo) C6369 C6370
1965-69 140 hp. C6371 C6372
For VITON Bell housing
& crank pulley SEAL
Add V to the end of
ANY part number
on this page
INSTALLING ENGINE SEALS CORRECTLY
1. Remove old seals and clean area
2. Apply a light coat of lubriplate or oil on
outer ribbed surface to aid installation.
From the Shop Manual – Coat seal with a
high melting point grease between
the sealing lips on the inside
diameter. Seals to be installed
must have this grease, which is retained for
the life of the seal (any quality all purpose
chassis grease will do.) 3. Be sure seal area
is smooth & coat with oil. 4. Seal area can
be polished with 600-800 grit sandpaper.
The “I Want The LEAST Complete” ENGINE GASKET SET
I need to completely reseal this engine but only want what MUST BE replaced. CLARK TOP QUALITY of course!
Year (All 2 Lbs. each)
WITH REGULAR
Head Gaskets
WITH NO
Head Gaskets
1960-64 Cars & 61-64 FC C9225 C9226
1965 FC C9225A C9226
1965-69 Cars (exc. 140 HP) C9227 C9228
1965-69 Cars with 140 HP C9229 C9230
These SETS INCLUDE a complete
HEAD GASKET Set “A” page 5 and
MAJOR BLOCK Set “B” page 5 (with cork pan gasket)
And TEFLON VALVE STEM SEALS “C” page 6
ADD “V” to any part # in chart for VITON CRANK SEALS
ON WEBSITE – Click on any number in the chart & the
"V" option will display below.
See page 1 to be sure you are ordering for the correct engine.
“FLAT” side of stock head
gasket goes against head.
ENGINE DISCOUNT !
see Blue pg. MK-2
SEALING
LIPS
Individual SEALS &
GASKETS – Pages 4-8
For VITON Bell
housing & crank
pulley SEAL
Add V to the end of
ANY part number
on this page
ON WEBSITE
Click on any number in the
chart & the "V" option will
display below.
3iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**The "I Want EVERY Gasket" ENGINE GASKET SET OKAY - YOU ASKED FOR IT! One part number that will give you every single possible replaceable gasket, head gasket, seals, exhaust packings, manifold "col-lars", valve cover gaskets, foam shroud seals, Viton o-rings, teflon valve stem seals, dipstick boot or grommet, all air cleaner gaskets, seals, carb. base spac-ers and gaskets (does not include carb. rebuild kits). Basically this KIT includes everything (and more) listed as Part "A", "B", "C" and "Optional" listed on pages 5 & 6. All KITS come with CORK oil pan gaskets and dipstick boot (grommet). See page 1 - be sure you are ordering for the right year. The only replaceable engine rubber that WILL NOT be included is the "perimeter" engine seal (weatherstrip) and rubber grommets. You save about 5% OFF individual part prices. Each SET will be individually boxed with a list of each part. All components of these SETS will be our very best top quality - NO COMPROMISEI Year (All 3 Lbs. each)Complete "I Want Everything Gasket Set"(With Regular Head Gaskets)Gasket Set (With NO Head Gaskets)Order Big Bore Gaskets Separately - Pg 71960 Cars C6355A C63561961-63 Cars (exc. Turbo) C6357 C63581961-64 FC & 1961-62 Lakewood C6361 C63621965 FC C6361A C63621964 Cars (exc. Turbo & A/C) C6359 C63601964 Cars with Air Conditioning Use C6357 Use C63581962-1964 Turbo (includes Turbo base & outlet gasket, chrome inlet to head gaskets, exhaust pipe thru shroud collars)C6363 C63641965-69 Cars (exc. 140, Turbo & 64 A/C) C6365 C63661965 with Air Conditioning (65 Style) C6367 C63681965-66 Turbo (See note for 62-64 Turbo) C6369 C63701965-69 140 hp. C6371 C6372For VITON Bell housing & crank pulley SEALAdd V to the end of ANY part numberon this pageINSTALLING ENGINE SEALS CORRECTLY1. Remove old seals and clean area 2. Apply a light coat of lubriplate or oil on outer ribbed surface to aid installation. From the Shop Manual - Coat seal with a high melting point grease between the sealing lips on the inside diameter. Seals to be installed must have this grease, which is retained for the life of the seal (any quality all purpose chassis grease will do.) 3. Be sure seal area is smooth & coat with oil. 4. Seal area can be polished with 600-800 grit sandpaper.The "I Want The LEAST Complete" ENGINE GASKET SETI need to completely reseal this engine but only want what MUST BE replaced. CLARK TOP QUALITY of course!Year (All 2 Lbs. each)WITH REGULAR Head GasketsWITH NO Head Gaskets1960-64 Cars & 61-64 FC C9225 C92261965 FC C9225A C92261965-69 Cars (exc. 140 HP) C9227 C92281965-69 Cars with 140 HP C9229 C9230These SETS INCLUDE a complete HEAD GASKET Set "A" page 5 and MAJOR BLOCK Set "B" page 5 (with cork pan gasket) And TEFLON VALVE STEM SEALS "C" page 6ADD "V" to any part # in chart for VITON CRANK SEALS ON WEBSITE - Click on any number in the chart & the "V" option will display below.See page 1 to be sure you are ordering for the correct engine."FLAT" side of stock head gasket goes against head.ENGINE DISCOUNT !see Blue pg. MK-2SEALING LIPSIndividual SEALS & GASKETS - Pages 4-8For VITON Bell housing & crank pulley SEALAdd V to the end of ANY part numberon this pageON WEBSITE Click on any number in the chart & the "V" option will display below.
Next
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498