Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
328
STARTER SELECTION Explained!
1. STANDARD Corvair ROTATION (you are just flipping the differential ring gear SWING AXLE ONLY)
A. You need a Corvair STARTER and STARTER ADAPTOR (to fit Corvair starter to VW transaxle case).
OR
B. You can order our heavy duty reverse rotation VW starter (rotates opposite of a regular VW) and now you
DO NOT need to get the starter adaptor.
2. REVERSE ROTATION Corvair Engine
A. You can use a standard VW starter (not really great for starting a Corvair engine). Older 6 volt ones need
109 tooth ring gear and are not suggested)! 12 volt VW starter "OK" (130 tooth).
OR
B. BETTER YET get our HEAVY DUTY VW STARTER and you'll spin that Corvair engine with ease!
Corvair Starters – REGULAR and HEAVY DUTY
See page 86
HEAVY DUTY VW STARTERS
REGULAR VW ROTATION C11435 11 lbs.
REVERSE VW ROTATION C11436 11 lbs.
CORVAIR STARTER ADAPTOR & BUSHING
Adapts the Corvair starter to VW transaxle for reverse differ ential ring gear kits. Mates to 130
tooth ring gear. (127 tooth ring gear no longer available. If you have that set up we still have
the offset bushings but other than that you'll have to get the 130 tooth ring gear and this
new adaptor). Also see reamer.
Starter Adaptor & Bushing C8763 1 lb.
Replacement Bushing (ea.) C8764 2 oz.
Replacement Offset Bushing (ea.) C6121 2 oz.
OFFSET BUSHING REAMER
This tool is needed to ream out the starter bushing hole in '71 and later VW
transaxle bell housings. The hole is a special size and requires this tool to size
the hole proper ly. If you already had the old offset bushing and adaptor, you do
not need this reamer.
RENTAL C8761 12 oz.
REVERSE FAN & PULLEY
For reliable belt tracking and best cooling for the alternator, you need the proper fan & pulley. This pulley
is deeper to provide a guide for the belt slack so it does not hit the fan blades and get cut. The fan is the
proper pitch for best cooling with reverse rotation. Three cut and broken belts would pay for this setup.
C8762 2 lbs.
REVERSE BELT GUIDE
With a reverse rotation Corvair the slack side of the belt is on the alternator side. This guide keeps the
belt tracking properly. It is included with the Reverse Engine Kit.
C5127 1 lb.
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**328STARTER SELECTION Explained! 1. STANDARD Corvair ROTATION (you are just flipping the differential ring gear SWING AXLE ONLY) A. You need a Corvair STARTER and STARTER ADAPTOR (to fit Corvair starter to VW transaxle case).OR B. You can order our heavy duty reverse rotation VW starter (rotates opposite of a regular VW) and now you DO NOT need to get the starter adaptor.2. REVERSE ROTATION Corvair Engine A. You can use a standard VW starter (not really great for starting a Corvair engine). Older 6 volt ones need 109 tooth ring gear and are not suggested)! 12 volt VW starter "OK" (130 tooth).OR B. BETTER YET get our HEAVY DUTY VW STARTER and you'll spin that Corvair engine with ease!Corvair Starters - REGULAR and HEAVY DUTY See page 86HEAVY DUTY VW STARTERS REGULAR VW ROTATION C11435 11 lbs. REVERSE VW ROTATION C11436 11 lbs.CORVAIR STARTER ADAPTOR & BUSHINGAdapts the Corvair starter to VW transaxle for reverse differ ential ring gear kits. Mates to 130 tooth ring gear. (127 tooth ring gear no longer available. If you have that set up we still have the offset bushings but other than that you'll have to get the 130 tooth ring gear and this new adaptor). Also see reamer. Starter Adaptor & Bushing C8763 1 lb. Replacement Bushing (ea.) C8764 2 oz. Replacement Offset Bushing (ea.) C6121 2 oz.OFFSET BUSHING REAMERThis tool is needed to ream out the starter bushing hole in '71 and later VW transaxle bell housings. The hole is a special size and requires this tool to size the hole proper ly. If you already had the old offset bushing and adaptor, you do not need this reamer. RENTAL C8761 12 oz. REVERSE FAN & PULLEYFor reliable belt tracking and best cooling for the alternator, you need the proper fan & pulley. This pulley is deeper to provide a guide for the belt slack so it does not hit the fan blades and get cut. The fan is the proper pitch for best cooling with reverse rotation. Three cut and broken belts would pay for this setup. C8762 2 lbs.REVERSE BELT GUIDEWith a reverse rotation Corvair the slack side of the belt is on the alternator side. This guide keeps the belt tracking properly. It is included with the Reverse Engine Kit. C5127 1 lb.
Next
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498